Gates 20883 lower radiator coolant hose for the 1980-1984 Ford Mustang 4-cylinder 2.3L and other vehicles and equipment carries coolant between the radiator and the engine. This Gates molded coolant hose comes from a line made for upper, lower, bypass and heater applications.
- Materials engineered to resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped for fit and a sealed connection
- EPDM tube, synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets SAE 20R4 class D2 and DIN 73411 class A (except for tolerances)
- Temperature range: -40 °F to +257 °F (-40 °C to +125 °C)
Quick facts
- Part: Gates 20883 radiator coolant hose
- Fits: 1980-1984 Ford Mustang 4-cylinder 2.3L and other vehicles and equipment
- Position: Lower
- Material: EPDM
- Condition: New
With the engine cool, a worn lower hose can show cracks, swelling, a soft or collapsed feel, or coolant seepage near the ends. A leaking radiator or a failing water pump can show similar coolant loss, so find the cause before replacing the hose.
Fits
This Gates radiator coolant hose is a molded lower hose that also fits the 1983-1984 Ford LTD 4-cylinder 2.3L and the 1980-1984 Mercury Capri 4-cylinder 2.3L, along with many other vehicles and equipment. If yours is not named here, search for it in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Lower
- Centerline length: 18.6 in (472 mm)
- End 1 inside diameter: 1.19 in (30 mm)
- End 2 inside diameter: 1.5 in (38 mm)
- Quantity per vehicle: 1
Build and materials
- Construction: Molded
- Material: EPDM
- Reinforcement: Synthetic fiber knit
- Country of origin: United States
- Condition: New
In the box
One lower radiator coolant hose, which is the quantity the application takes.
Installation notes
- Replace the hose clamps each time a new coolant hose is installed.
- Use for coolant only, not for fuel or oil transfer applications.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is the Gates lower radiator hose 20883 right for the 1980-1984 Ford Mustang 4-cylinder 2.3L?
Yes. Gates 20883 is a lower radiator coolant hose for the 1980-1984 Ford Mustang 4-cylinder 2.3L. For another vehicle or equipment, look it up in the "Vehicles it fits" section.
What is this Gates coolant hose made of?
Its tube and cover are EPDM, with a synthetic fiber knit reinforcement. Gates 20883 is rated for -40 °F to +257 °F (-40 °C to +125 °C).
What are the end diameters and length of this lower hose?
One end has a 30 mm (1.19 in) inside diameter and the other has 38 mm (1.5 in). The centerline length is 18.6 in (472 mm).
Can this molded hose be used on a fuel or oil line?
No. It is made for coolant only; do not use it for fuel or oil transfer applications.
Do I need new hose clamps when I replace this hose?
Yes, plan on new clamps. Hose clamps should be replaced each time a new coolant hose is installed.
