Dorman Bolt P/N:980-420D
Dorman 980-125D bolt is a hex bolt that threads into a tapped hole or nut to clamp parts together. This Dorman bolt has a metric M5-.8 thread and a 25 mm thread length.
A rounded hex head, stripped threads or heavy rust can mean a bolt is ready to be replaced. Before you replace a bolt that keeps working loose, rule out a worn tapped hole or a mismatched nut, since either can let a good bolt back out.
This is universal hardware, sold by size rather than by application, so match the M5-.8 thread and 25 mm length to the bolt you are replacing. The pack holds four bolts.
Fit and size
Build and materials
Four bolts.
Interchange: 980-125
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
How do I know the Dorman 980-125D bolt is the right size for my repair?
Match the M5-.8 thread and the 25 mm length to the bolt you are replacing. The Dorman 980-125D is sold by size and thread, not by application.
How many bolts come in the Dorman 980-125D pack?
The pack has four bolts. Each one is an M5-.8 x 25 mm hex bolt with a yellow zinc finish.
Is this M5 hex bolt steel or stainless?
It is steel with a yellow zinc finish and heat hardening. The grade is Class 10.9.
How can I tell an M5 hex bolt needs replacing?
A rounded hex head, stripped threads or heavy rust can mean the bolt should be replaced. Damaged threads on the bolt are easiest to see once it is out.
Is the Dorman 980-125D bolt corrosion tested?
Yes. The Dorman 980-125D hardware goes through salt spray testing to check corrosion resistance, and it has a yellow zinc finish over steel.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.