Heater Hose for 1998-2000 Toyota RAV4 - Gates 19050

$118.99

Part number: 19050

UPC: 072053355291

Condition: New

Weight: 3.74 LBS

Item Package Quantity: 1

$118.99

Current Stock: 7

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Gates HVAC Heater Hose P/N:19050

$118.99

Description

Gates 19050 heater hose for the 1998-2000 Toyota RAV4 4-cylinder 2.0L runs coolant between the heater and the intake manifold. This Gates molded heater hose, also called an HVAC heater hose, is sold as a single piece.

Gates Small I.D. Molded Coolant Hose line with an EPDM tube, synthetic fiber knit reinforcement and EPDM cover
Factory-molded shape made for today's smaller, tighter engine compartments
Engineered to resist electrochemical degradation, the leading cause of hose failure
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)
Approved for coolant, water and air applications and for marine use

Quick facts

Part: Gates 19050 heater hose
Also called: HVAC heater hose
Fits: 1998-2000 Toyota RAV4 4-cylinder 2.0L
Position: Heater to intake manifold
Material: EPDM
Condition: New

A worn heater hose can show up as coolant drips near its ends, a soft, swollen or cracked hose, or a heater that blows cool air. Those signs can have other causes. With the engine off and cool, look along the hose and at both ends for cracks, bulges and wet spots, and track down the source of any leak before you replace the hose.

Fits

This hose is a direct-fit replacement for the 1998-2000 Toyota RAV4 4-cylinder 2.0L, which takes one.

Specifications

Fit and size

Position: heater to intake manifold
Quantity per vehicle: 1
Centerline length: 29.6 in (752 mm)
End 1 inside diameter: 0.63 in (16 mm)
End 2 inside diameter: 0.72 in (18 mm)

Build and materials

Construction: molded
Material: EPDM
Condition: New
Country of origin: United States

Installation notes

Replace the hose clamps each time a new coolant hose is installed.
Not for fuel or oil transfer applications.

Interchange: 18107L · E90874 · 63528 · 11050 · 8724542090

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

18107L, 19050, E90874, 63528, 11050, 8724542090

Buyer's Q&A

Frequently Asked Questions

Is the Gates 19050 heater hose right for the 1998-2000 Toyota RAV4 4-cylinder 2.0L?

Yes. Gates 19050 is listed for the 1998-2000 Toyota RAV4 4-cylinder 2.0L and runs from the heater to the intake manifold. That engine takes one.

What size are the ends on this heater hose?

End 1 has a 16 mm (0.63 in) inside diameter and end 2 has an 18 mm (0.72 in) inside diameter. The centerline length is 752 mm (29.6 in).

Is this heater hose made of EPDM?

Yes. Gates 19050 has an EPDM tube and cover with a synthetic fiber knit reinforcement, and it is molded to shape.

Can this heater hose be used for fuel or oil lines?

No. This hose is for coolant, water and air applications and must not be used to carry fuel or oil.

Do the hose clamps need replacing when I install this heater hose?

Yes. Replace the hose clamps each time a new coolant hose goes on.

Reviews

No reviews yet — be the first to review this product.

Write a Review

Heater Hose for 1998-2000 Toyota RAV4 - Gates 19050