Clutch Flywheel for 2002-2006 Nissan Altima & More - LuK DMF040

$387.99

Vehicles this part fits

    Part number: DMF040
    UPC: 670774054778
    Condition: New
    Weight: 29.10 LBS
    Item Package Quantity: 1
    $387.99
    Adding to cart… The item has been added

    Have questions?

    LuK Clutch Flywheel P/N:DMF040
    LuK Clutch Flywheel P/N:DMF040
    $387.99
    $387.99

    LuK DMF040 clutch flywheel for the 2002-2006 Nissan Altima 4-cylinder 2.5L and other vehicles absorbs engine torsional vibrations before they reach the gearbox.

    • Two masses mounted to rotate against each other, as in a dual mass flywheel (DMF)
    • Integrated arc springs damp torsional vibrations from the engine almost completely
    • Absorbs engine vibrations and torque spikes that could damage the gearbox
    • Less bending stress on the engine crankshaft
    • Less vibration reaches the clutch pedal
    • Dampens torsional vibrations in the powertrain across all speed ranges for driving comfort

    Quick facts

    • Part: LuK DMF040 clutch flywheel
    • Fits: 2002-2006 Nissan Altima 4-cylinder 2.5L and other vehicles

    A worn dual mass flywheel can show up as rattling at idle, vibration through the clutch pedal or a shudder when the clutch engages. These signs alone do not prove the flywheel is the problem, since a worn clutch disc can cause similar ones.

    Fits

    This clutch flywheel fits the 2002-2006 Nissan Altima 4-cylinder 2.5L and the 2002-2006 Nissan Sentra 4-cylinder 2.5L. Each engine takes one flywheel on its crankshaft, and this listing is a single flywheel.

    Specifications

    Fit and size

    • Quantity per vehicle: 1
    • Outside diameter: 318.9 mm (12.555 in)
    • Friction surface outer diameter: 300 mm (11.811 in)
    • Friction surface inner diameter: 154 mm (6.063 in)
    • Centering diameter / dowel hole: 280 mm (11.024 in)
    • Crankshaft register inside diameter: 16 mm (0.630 in)
    • Dowel hole diameter: 6 mm (0.236 in)
    • Bolt hole PCD, crankshaft: 66 mm (2.598 in)
    • Bolt hole PCD, clutch pressure plate: 280 mm (11.024 in)
    • Flywheel thickness: 59.2 mm (2.331 in)
    • Crank to friction surface: 42.9 mm (1.689 in)

    Build and materials

    • Type: dual mass flywheel with integrated arc springs
    • Ring gear: 125 teeth, 10 mm thick
    • Country of origin: Germany

    Interchange: FDN-913 · 12310-8H301
    167302 · 4150153100 · DMF91140 · 836291

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    FDN-913, 167302, 4150153100, 12310-8H301, DMF91140, 836291

    Frequently Asked Questions

    Is the LuK DMF040 a flywheel for the 2006 Nissan Altima 4-cylinder 2.5L?

    Yes. LuK DMF040 fits the 2002-2006 Nissan Altima 4-cylinder 2.5L, and it is also listed for the 2002-2006 Nissan Sentra 4-cylinder 2.5L.

    What size is the friction surface on the LuK DMF040 flywheel?

    The friction surface is 300 mm across on the outside and 154 mm on the inside. The centering diameter and the clutch pressure plate bolt circle are both 280 mm.

    What do the arc springs in this dual mass flywheel do?

    The arc springs are the damping system between the two masses. They absorb torsional vibrations from the engine so less of them reaches the gearbox and clutch pedal.

    What signs can point to a worn dual mass flywheel?

    Rattling at idle, vibration through the clutch pedal or a shudder when the clutch engages can be signs. A shop can inspect the flywheel once the clutch is out.

    Does LuK DMF040 replace part number 12310-8H301?

    Yes. 12310-8H301 is an interchange number for LuK DMF040, along with FDN-913 and 836291.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review