Clutch Flywheel for 2005-2008 Jeep Liberty & More - LuK DMF069

$419.99

Part number: DMF069

UPC: 670774133121

Condition: New

Weight: 37.30 LBS

Item Package Quantity: 1

$419.99

Current Stock: 30

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

LuK Clutch Flywheel P/N:DMF069

$419.99

Description

LuK DMF069 clutch flywheel for the 2005-2008 Jeep Liberty V6 3.7L and other vehicles is a dual mass flywheel that damps torsional vibrations in the drivetrain.

Two masses mounted to rotate against each other, with arc springs built in for damping
Absorbs engine vibrations and torque spikes that could otherwise damage the gearbox
Less bending stress on the engine's crankshaft
Less vibration reaching the clutch pedal
Dampens torsional vibrations in all speed ranges, and is matched to the vehicle for low-speed driving, lower fuel consumption and lower emissions

Quick facts

Part: LuK DMF069 clutch flywheel
Fits: 2005-2008 Jeep Liberty V6 3.7L and other vehicles
Condition: New

A worn clutch flywheel can show up as a rattle at idle, shudder when pulling away or extra vibration through the clutch pedal. Before you replace the flywheel, rule out the clutch disc, pressure plate and release bearing, since worn parts there can produce a rattle or judder of their own.

Fits

This flywheel fits the 2005-2008 Jeep Liberty V6 3.7L and the 2007-2008 Dodge Nitro V6 3.7L. The engine takes a single flywheel, bolted to the crankshaft.

Specifications

Fit and size

Quantity per vehicle: 1
Friction surface outer diameter: 280 mm (11.024 in)
Friction surface inner diameter: 158 mm (6.22 in)
Overall casting outer diameter: 317.2 mm (12.488 in)
Centering diameter / dowel hole: 294 mm (11.575 in)
Pilot inner diameter: 31 mm (1.22 in)
Crankshaft register inside diameter: 11.5 mm (.453 in)
Crankshaft bolt circle: 80 mm (3.15 in)
Crankshaft bolt count: 24
Clutch pressure plate bolt circle: 295.275 mm (11.625 in)
Flywheel thickness: 67.3 mm (2.65 in)
Crank to friction surface: 50.3 mm (1.98 in)
Ring gear to friction surface: 53.1 mm (2.091 in)

Build and materials

Type: dual mass flywheel with arc spring damping
Ring gear: 131 teeth, ring gear number L-09180-0170-00
Condition: New
Country of origin: Germany

In the box

One clutch flywheel with dowel pins.

Interchange: 167069 · 4150607100

Product information is for general reference and may contain errors. See our Disclaimer.

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

167069, 4150607100

Buyer's Q&A

Frequently Asked Questions

Is the LuK DMF069 clutch flywheel right for the 2005-2008 Jeep Liberty V6 3.7L?

Yes. LuK DMF069 fits the 2005-2008 Jeep Liberty V6 3.7L and the 2007-2008 Dodge Nitro V6 3.7L, and the engine takes one flywheel.

Does this clutch flywheel come with dowel pins?

Yes. LuK DMF069 comes with dowel pins.

What is the friction surface diameter on this clutch flywheel?

The LuK DMF069 friction surface measures 280 mm (11.024 in) outside and 158 mm (6.22 in) inside. The ring gear has 131 teeth.

What can a failing clutch flywheel feel like?

A rattle at idle, judder when pulling away or extra vibration through the clutch pedal can be signs of a worn clutch flywheel, though other clutch parts can cause them too. A shop can test it.

How does this LuK clutch flywheel damp engine vibration?

Two masses rotate against each other, and integrated arc springs absorb the engine's torsional vibrations almost completely.

Reviews

No reviews yet — be the first to review this product.

Write a Review

Clutch Flywheel for 2005-2008 Jeep Liberty & More - LuK DMF069