Clutch Flywheel for 2004-2005 Audi S4 - LuK DMF088

$1,094.99

Vehicles this part fits

    Part number: DMF088
    UPC: 670774201394
    Condition: New
    Weight: 27.90 LBS
    Item Package Quantity: 1
    $1,094.99
    Adding to cart… The item has been added

    Have questions?

    LuK Clutch Flywheel P/N:DMF088
    LuK Clutch Flywheel P/N:DMF088
    $1,094.99
    $1,094.99

    LuK DMF088 clutch flywheel for the 2004-2005 Audi S4 V8 4.2L absorbs torsional vibrations from the engine. Unlike a conventional flywheel, a dual mass flywheel (DMF) uses two masses mounted to rotate against each other.

    • Arc springs built into the flywheel damp engine torsional vibrations almost completely
    • Absorbs engine vibrations and torque spikes that could otherwise damage the gearbox
    • Puts less bending stress on the engine's crankshaft
    • Sends less vibration to the clutch pedal
    • Matched to the vehicle for low-speed driving, with lower fuel consumption and emissions

    Quick facts

    • Part: LuK DMF088 clutch flywheel
    • Fits: 2004-2005 Audi S4 V8 4.2L
    • Condition: New

    A worn dual mass flywheel can show up as rattling or knocking from the engine, extra vibration through the clutch pedal, or shudder when pulling away. Before you replace the flywheel, rule out the clutch disc, pressure plate and release bearing, since worn clutch parts can cause similar symptoms.

    Fits

    This flywheel fits the 2004-2005 Audi S4 V8 4.2L, which takes one.

    Specifications

    Fit and size

    • Quantity per vehicle: 1
    • Outside diameter: 292.5 mm (11.516 in)
    • Overall casting O.D.: 297 mm (11.693 in)
    • Flywheel thickness: 60.8 mm (2.394 in)
    • Friction surface outer diameter: 241 mm (9.488 in)
    • Friction surface inner diameter: 153.5 mm (6.043 in)
    • Ring gear mounting O.D.: 265.65 mm (10.459 in)
    • Crankshaft bolt hole PCD: 68 mm (2.677 in)
    • Clutch pressure plate bolt hole PCD: 260 mm (10.236 in)
    • Centering diameter / dowel hole: 260 mm (10.236 in)
    • Pilot I.D.: 24 mm (0.945 in)
    • Crankshaft register diameter: 10.5 mm (0.413 in)
    • Dowel hole diameter: 6 mm (0.236 in)

    Build and materials

    • Type: dual mass flywheel with arc spring damping
    • Ring gear: 117 teeth, 10 mm thick (0.394 in)
    • Ring gear number: L-09180-0077-00
    • Condition: New
    • Country of origin: Germany

    Interchange: 079 105 266 B · 4150324100

    This part cross-references / interchanges with the following part numbers:

    079 105 266 B, 4150324100

    Frequently Asked Questions

    Is the LuK DMF088 the right dual mass flywheel for a 2004-2005 Audi S4 V8 4.2L?

    Yes, the LuK DMF088 fits the 2004-2005 Audi S4 V8 4.2L. The engine takes one flywheel, and this listing is a single unit.

    What is the outside diameter of the LuK DMF088 flywheel?

    The LuK DMF088 measures 292.5 mm (11.516 in) across its outside diameter. Its overall casting O.D. is 297 mm and the centering diameter is 260 mm.

    How many teeth does the ring gear on this dual mass flywheel have?

    The ring gear has 117 teeth and is 10 mm thick. Its ring gear number is L-09180-0077-00.

    How can I tell if a dual mass flywheel is wearing out?

    Rattling or knocking from the engine, extra vibration through the clutch pedal and shudder when pulling away can all be signs. A shop can inspect the flywheel to confirm.

    Does the LuK DMF088 replace part number 4150324100?

    Yes, 4150324100 is a listed interchange number for the LuK DMF088, along with 079 105 266 B.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review