LuK LFW220 clutch flywheel for the 1987-1995 Nissan Pathfinder V6 3.0L and other vehicles gives the clutch a smooth, flat surface to grip. Every component, ring gear included, is engineered and manufactured to OE specifications.
- Rigid, solid flywheel with a smooth, flat friction surface for proper clutch operation
- Dynamically balanced to eliminate vibration and increase clutch performance
- Ring gear with 120 teeth
- Engineered for a longer service life of the flywheel and clutch system
Quick facts
- Part: LuK LFW220 clutch flywheel
- Fits: 1987-1995 Nissan Pathfinder V6 3.0L and other vehicles
- Condition: New
A worn or uneven friction surface can show up as clutch chatter, vibration or a slipping clutch. A worn clutch disc is another common source of these symptoms, so they alone do not prove the flywheel is at fault. When a new clutch set goes in, a new flywheel is an alternative to resurfacing the old one.
Fits
This clutch flywheel fits the 1987-1995 Nissan Pathfinder V6 3.0L, the 1995 Nissan Pickup V6 3.0L and the 1988-1994 Nissan D21 V6 3.0L.
Specifications
Fit and size
- Quantity per vehicle: 1
- Outside diameter: 305.3 mm (12.020 in)
- Friction surface outer diameter: 275 mm (10.827 in)
- Friction surface inner diameter: 146 mm (5.748 in)
- Ring gear mounting O.D.: 274 mm (10.787 in)
- Centering diameter / dowel hole: 290 mm (11.417 in)
- Clutch pressure plate bolt hole PCD: 290 mm (11.417 in)
- Crankshaft bolt hole PCD: 65.5 mm (2.579 in)
- Pilot I.D.: 43 mm (1.693 in)
- Crankshaft register diameter: 10.5 mm (.413 in)
- Dowel hole diameter: 6 mm (.236 in)
- Flywheel thickness: 28.6 mm (1.126 in)
- Flange thickness: 13 mm (.512 in)
- Crank to friction surface: 24 mm (.945 in)
Build and materials
- Type: rigid, solid flywheel, dynamically balanced
- Ring gear: 120 teeth, 12.4 mm (.488 in) thick, chamfer on the engine side
- Dowel pins: included
- Condition: New
- Country of origin: China
In the box
One clutch flywheel with dowel pins. This listing holds one flywheel, and the quantity per vehicle is one.
Interchange: 167026 · 4160184100 · NFW5305
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
167026, 4160184100, NFW5305
Frequently Asked Questions
Does the LuK LFW220 clutch flywheel fit a 1995 Nissan Pickup V6 3.0L?
Yes. The LuK LFW220 fits the 1995 Nissan Pickup V6 3.0L, which takes one flywheel.
Does this LuK flywheel come with a ring gear and dowel pins?
Yes. The LuK LFW220 has a 120-tooth ring gear, 12.4 mm thick, and comes with dowel pins.
What is the outside diameter of this clutch flywheel?
The outside diameter is 305.3 mm (12.020 in). The friction surface runs from 146 mm inner to 275 mm outer diameter.
What signs can a clutch flywheel with a worn friction surface show?
Clutch chatter, vibration or a slipping clutch can mean the friction surface is worn or uneven. A shop can inspect and measure it.
Does the LuK LFW220 replace flywheel number 167026?
Yes. 167026 is listed as an interchange number for the LuK LFW220 clutch flywheel, along with 4160184100 and NFW5305.
