LuK LFW246 clutch flywheel for the 2000-2006 Hyundai Elantra 4-cylinder 2.0L and other vehicles gives the clutch disc a smooth, flat surface to grip. This new rigid flywheel has every component, ring gear included, made to Original Equipment (OE) specifications.
- Smooth, flat friction surface for proper clutch operation, used in place of resurfacing the old flywheel
- Dynamically balanced to eliminate vibration and increase clutch performance
- Solid flywheel with a 106-tooth ring gear
- Dowel pins fitted to the flywheel
Quick facts
- Part: LuK LFW246 clutch flywheel
- Fits: 2000-2006 Hyundai Elantra 4-cylinder 2.0L and other vehicles
- Condition: New
A worn flywheel can show up as a shudder or vibration when the clutch engages, a slipping clutch, or hot spots and grooves on the friction surface. A worn clutch disc is another common cause of slipping, so these signs alone do not prove the flywheel is at fault.
Fits
This flywheel is listed for a wide range of Hyundai and Kia models, led by the 2000-2006 Hyundai Elantra 4-cylinder 2.0L, the 2004-2009 Kia Spectra 4-cylinder 2.0L and the 2005-2009 Kia SPECTRA5 4-cylinder 2.0L, and each takes one. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Quantity per vehicle: 1
- Outside diameter: 271.43 mm (10.686 in)
- Overall casting O.D.: 267.81 mm (10.544 in)
- Friction surface outer diameter: 236 mm (9.291 in)
- Friction surface inner diameter: 127 mm (5.000 in)
- Ring gear mounting O.D.: 245.96 mm (9.683 in)
- Centering diameter / dowel hole: 247 mm (9.724 in)
- Pilot I.D.: 14.95 mm (.589 in)
- Crankshaft register diameter: 12.45 mm (.490 in)
- Dowel hole diameter: 8 mm (.315 in)
- Bolt hole PCD, crankshaft: 59.9 mm (2.358 in)
- Bolt hole PCD, clutch pressure plate: 247 mm (9.724 in)
- Flywheel thickness: 34 mm (1.339 in)
- Ring gear thickness: 8.52 mm (.335 in)
- Flange thickness: 11.38 mm (.448 in)
- Crank to friction surface: 23.81 mm (.937 in)
- Ring gear teeth: 106
- Flywheel to crankshaft bolts: 2
Build and materials
- Type: rigid, solid flywheel
- Dowel pins: with dowel pins
- Ring gear chamfer side: engine
- Balance: dynamically balanced
- Condition: New
- Country of origin: China
Interchange: 167535 · 4160209100 · NFW5317 · NFW9124
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
167535, 4160209100, NFW5317, NFW9124
Frequently Asked Questions
Is the LuK LFW246 flywheel right for a 2000-2006 Hyundai Elantra 4-cylinder 2.0L?
Yes. LuK LFW246 is listed for the 2000-2006 Hyundai Elantra 4-cylinder 2.0L, and each application takes one flywheel. Open the "Vehicles it fits" section to check your exact model and engine.
How many teeth does the LuK LFW246 ring gear have?
The ring gear has 106 teeth and is 8.52 mm (.335 in) thick, with its chamfer on the engine side.
Does this clutch flywheel come with dowel pins?
Yes. This flywheel is listed with dowel pins, and the dowel holes are 8 mm (.315 in) in diameter.
What does a worn clutch flywheel feel like when driving?
Common signs are a shudder or vibration as the clutch engages, a slipping clutch, or a burning smell. A shop can measure the friction surface to confirm what is going on.
Does the LuK LFW246 replace number NFW5317?
Yes. NFW5317 is one of the other numbers that LuK LFW246 replaces. The full cross-reference is on the Interchange line of the page.
