LuK LFW262 clutch flywheel for the 1999-2010 Subaru Forester H4 2.5L and other vehicles gives the clutch a smooth, flat friction surface to work against. This rigid flywheel is new, and every component, ring gear included, is engineered and manufactured to OE specifications.
- Smooth, flat friction surface for proper clutch operation
- Dynamically balanced to eliminate vibration and increase clutch performance
- Ring gear with 124 teeth
- New flywheel as an alternative to resurfacing the old one
- Engineering and quality materials aimed at a longer service life for the flywheel and clutch system
Quick facts
- Part: LuK LFW262 clutch flywheel
- Fits: the 1999-2010 Subaru Forester H4 2.5L and other vehicles
- Condition: New
A clutch that chatters, a vibration as the pedal comes up, or a scored or heat-marked friction surface can mean the flywheel is worn. A worn clutch disc is another common source of slipping, so these signs alone do not prove the flywheel is at fault.
Fits
The 1999-2010 Subaru Forester H4 2.5L, the 1999-2011 Subaru Impreza H4 2.5L and the 2000 Subaru Outback H4 2.5L all take this flywheel, and so do other Subaru models. If your car is not named here, look it up in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Outside diameter: 315 mm (12.402 in)
- Overall casting O.D.: 302 mm (11.890 in)
- Friction surface outer diameter: 260 mm (10.236 in)
- Friction surface inner diameter: 145 mm (5.709 in)
- Ring gear mounting O.D.: 289 mm (11.378 in)
- Pilot I.D.: 31.9 mm (1.256 in)
- Crankshaft register diameter: 10.45 mm (.411 in)
- Bolt hole PCD, crankshaft: 66 mm (2.598 in)
- Bolt hole PCD, clutch pressure plate: 268 mm (10.551 in)
- Centering diameter / dowel hole: 268 mm (10.551 in)
- Dowel hole diameter: 6 mm (.236 in)
- Flywheel thickness: 27 mm (1.063 in)
- Ring gear teeth: 124
Build and materials
- Type: rigid flywheel
- Dowel pins: included
- Ring gear chamfer matches OE
- Condition: New
- Country of origin: Thailand
In the box
One clutch flywheel with dowel pins. This listing holds one flywheel, and the vehicle takes one.
Interchange: 12310-AA061 · 12342-AA000
167850 · 4160054100 · NFW6614
This part cross-references / interchanges with the following part numbers:
167850, 4160054100, NFW6614, 12310-AA061, 12342-AA000
Frequently Asked Questions
Is the LuK LFW262 the right Subaru Impreza clutch flywheel for 1999-2011 cars with the H4 2.5L?
Yes. The LuK LFW262 fits the 1999-2011 Subaru Impreza H4 2.5L, and the car takes one flywheel.
Does this LuK flywheel come with dowel pins?
Yes. The LuK LFW262 clutch flywheel comes with dowel pins.
How many teeth does the ring gear on this clutch flywheel have?
The ring gear has 124 teeth. It is 11.2 mm thick and mounts at a 289 mm (11.378 in) outer diameter.
How can I tell if a flywheel's friction surface is worn?
During a clutch service, look for deep grooves, cracks or blue heat marks on the flywheel face. A shop can also measure it for flatness.
Does the LuK LFW262 replace part number 12310-AA061?
Yes. 12310-AA061 is listed as an interchange number for the LuK LFW262, along with 12342-AA000.
