Clutch Flywheel for 1994-2001 Dodge Ram 1500 & More - LuK LFW375

$228.99

Vehicles this part fits

    Part number: LFW375
    UPC: 670774245442
    Condition: New
    Weight: 26.40 LBS
    Item Package Quantity: 1
    $228.99
    Adding to cart… The item has been added

    Have questions?

    LuK Clutch Flywheel P/N:LFW375
    LuK Clutch Flywheel P/N:LFW375
    $228.99
    $228.99

    LuK LFW375 clutch flywheel for the 1994-2001 Dodge Ram 1500 V8 5.2L and other vehicles gives the clutch disc a smooth, flat surface to work against. This new rigid flywheel is an alternative to resurfacing, and every component, ring gear included, is engineered and manufactured to Original Equipment (OE) specifications.

    • Rigid flywheel with a smooth, flat friction surface for proper clutch operation
    • Dynamically balanced to eliminate vibration and increase clutch performance
    • Engineering and quality materials aimed at service life for the flywheel and clutch system

    Quick facts

    • Part: LuK LFW375 clutch flywheel
    • Fits: 1994-2001 Dodge Ram 1500 V8 5.2L and other vehicles
    • Condition: New

    A flywheel with a worn or heat-marked friction surface can show up as clutch shudder, vibration or a slipping clutch. A slipping or shuddering clutch alone does not prove the flywheel is at fault, since a worn clutch disc is another common cause.

    Fits

    This flywheel is listed for a wide range of Dodge trucks, led by the 1994-2001 Dodge Ram 1500 V8 5.2L, the 1994-1999 Dodge Dakota V8 5.2L and the 1994-1996 Dodge Ram 2500 V8 5.2L, and each takes one.

    Specifications

    Fit and size

    • Quantity per vehicle: 1
    • Outside diameter: 370.4 mm (14.583 in)
    • Overall casting outer diameter: 351.45 mm (13.837 in)
    • Friction surface outer diameter: 305 mm (12.008 in)
    • Friction surface inner diameter: 150 mm (5.906 in)
    • Ring gear mounting outer diameter: 345 mm (13.583 in)
    • Pilot inner diameter: 54.73 mm (2.155 in)
    • Clutch pressure plate bolt hole PCD: 321 mm (12.638 in)
    • Flywheel thickness: 34.38 mm (1.354 in)
    • Flange thickness: 12 mm (0.472 in)
    • Crank to friction surface: 28.6 mm (1.126 in)
    • Ring gear thickness: 8.73 mm (0.344 in)
    • Ring gear teeth: 143

    Build and materials

    • Type: rigid flywheel
    • Dowel pins: without
    • Balancing: dynamically balanced
    • Condition: New
    • Country of origin: Thailand

    Interchange: 5 3006 738
    167410 · 4160200100 · NFW7225

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    167410, 5 3006 738, 4160200100, NFW7225

    Frequently Asked Questions

    Is LuK LFW375 the right Dodge Dakota clutch flywheel for a 1994-1999 model with the V8 5.2L?

    Yes. LuK LFW375 is listed for the 1994-1999 Dodge Dakota V8 5.2L, and each takes one. If your truck is another model, look it up in the "Vehicles it fits" section.

    Does the LuK LFW375 come with dowel pins?

    No. The LuK LFW375 flywheel is listed without dowel pins.

    What size is the friction surface on this clutch flywheel?

    The friction surface is 305 mm (12.008 in) across the outside and 150 mm (5.906 in) across the inside. The pilot inner diameter is 54.73 mm (2.155 in).

    How can I tell if a rigid flywheel like the LuK LFW375 is worn?

    A worn flywheel can show as clutch shudder, vibration when the clutch engages or a slipping clutch. A shop can inspect the friction surface once the clutch is out.

    Is the LuK LFW375 flywheel balanced?

    Yes. The LuK LFW375 is dynamically balanced, which is meant to cut vibration and help clutch performance.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review