LuK LFW458 clutch flywheel for the 2012-2017 Fiat 500 4-cylinder 1.4L gives the clutch a smooth, flat surface to grip.
- LuK rigid flywheel with a smooth, flat surface for proper clutch operation
- Dynamically balanced to eliminate vibration and increase clutch performance
- Ring gear with 116 teeth, and dowel pins fitted
- Engineered materials contribute to a longer service life for the flywheel and clutch system
- A new flywheel is an alternative to resurfacing the old one
Quick facts
- Part: LuK LFW458 clutch flywheel
- Fits: 2012-2017 Fiat 500 4-cylinder 1.4L
- Condition: New
A worn or damaged flywheel can show up as vibration, clutch shudder, or a scored, cracked or heat-marked friction surface. Clutch parts can also produce a shudder, so when the clutch is out for service, look over the friction surface and the ring gear teeth with the engine off before you decide to replace the flywheel.
Fits
As a 2012-2017 Fiat 500 flywheel for the 4-cylinder 1.4L, it has every component, ring gear included, built to OE specifications, and each car takes one.
Specifications
Fit and size
- Quantity per vehicle: 1
- Outside diameter: 250 mm (9.843 in)
- Overall casting O.D.: 238 mm (9.370 in)
- Friction surface outer diameter: 202 mm (7.953 in)
- Friction surface inner diameter: 132 mm (5.197 in)
- Ring gear mounting O.D.: 227 mm (8.937 in)
- Bolt hole PCD, clutch pressure plate: 216 mm (8.504 in)
- Centering diameter / dowel hole: 216 mm (8.504 in)
- Bolt hole PCD, crankshaft: 58.86 mm (2.317 in)
- Pilot I.D.: 37.78 mm (1.487 in)
- Dowel hole diameter: 6 mm (.236 in)
- Flywheel thickness: 29.9 mm (1.177 in)
- Ring gear thickness: 9.2 mm (.362 in)
- Ring gear teeth: 116
Build and materials
- Type: rigid flywheel
- Dowel pins: with dowel pins
- Condition: New
- Country of origin: Thailand
Interchange: 5106121AA · 4160261100
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is the LuK LFW458 the right flywheel for a 2012-2017 Fiat 500 4-cylinder 1.4L?
Yes. LuK LFW458 is listed for the 2012-2017 Fiat 500 4-cylinder 1.4L, and the car takes one flywheel.
How many teeth does the ring gear on this LuK flywheel have?
The LuK LFW458 ring gear has 116 teeth. It is 9.2 mm thick and has a 227 mm mounting O.D.
What size is the friction surface on this flywheel?
The friction surface measures 202 mm across on the outer edge and 132 mm on the inner edge. The flywheel's overall outside diameter is 250 mm.
What does a worn clutch flywheel feel like?
It can show up as vibration or clutch shudder. A shop can also spot grooves, cracks or heat marks on the friction surface when the clutch is out.
Is 5106121AA the same as the LuK LFW458?
5106121AA is listed as an interchange number for this flywheel, along with 4160261100. Both numbers are for the same LuK LFW458 part.
