LuK LFW466 clutch flywheel for the 2004-2006 GMC Canyon 5-cylinder 3.5L and other vehicles gives the clutch disc a smooth, flat friction surface to grip. Installing it with a new clutch set is an alternative to resurfacing the old flywheel.
- Rigid, solid flywheel with a smooth, flat surface for proper clutch operation
- Dynamically balanced to eliminate vibration and increase clutch performance
- Supplied new, with its ring gear
- Engineering and quality materials contribute to a longer service life for the flywheel and clutch system
Quick facts
- Part: LuK LFW466 clutch flywheel
- Fits: the 2004-2006 GMC Canyon 5-cylinder 3.5L and other vehicles
- Condition: New
A worn or glazed flywheel can show up as clutch shudder, vibration, or heat spots and grooves on the friction surface. Before you replace the flywheel, rule out the clutch disc, pressure plate, release bearing and clutch hydraulics as the source of those signs. Each engine takes one flywheel, on the end of the crankshaft.
Fits
It is a direct-fit replacement for the 2004-2006 GMC Canyon 5-cylinder 3.5L, the 2004-2005 Chevrolet Colorado 5-cylinder 3.5L, the 2006 Hummer H3 5-cylinder 3.5L and the 2007-2010 H3 5-cylinder 3.7L. Every component, including the ring gear, is engineered and manufactured to Original Equipment (OE) specifications.
Specifications
Fit and size
- Quantity per vehicle: 1
- Outside diameter: 344.5 mm (13.563 in)
- Overall casting O.D.: 334 mm (13.150 in)
- Friction surface outer diameter: 293 mm (11.535 in)
- Friction surface inner diameter: 191 mm (7.520 in)
- Ring gear mounting O.D.: 323 mm (12.717 in)
- Pilot I.D.: 36.7 mm (1.445 in)
- Centering diameter / dowel hole: 304.5 mm (11.988 in)
- Bolt circle, clutch pressure plate: 304.5 mm (11.988 in)
- Bolt circle, crankshaft: 62.5 mm (2.461 in)
- Dowel hole diameter: 6 mm (.236 in)
- Flywheel thickness: 35.4 mm (1.394 in)
- Crank to friction surface: 32.85 mm (1.293 in)
- Ring gear thickness: 11.3 mm (.445 in)
- Ring gear teeth: 161
Build and materials
- Type: rigid (solid) flywheel with ring gear
- Condition: New
- Country of origin: China
In the box
One clutch flywheel with its ring gear.
Interchange: 167584 · 12579178 · 19177876 · 4160271100
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
167584, 12579178, 19177876, 4160271100
Frequently Asked Questions
Does the LuK LFW466 flywheel fit a 2007-2010 Hummer H3 5-cylinder 3.7L?
Yes. LuK LFW466 is listed for the 2007-2010 Hummer H3 5-cylinder 3.7L, as well as the 2006 Hummer H3 5-cylinder 3.5L.
What are the ring gear tooth count and outside diameter of this LuK clutch flywheel?
LuK LFW466 has a 161-tooth ring gear and an outside diameter of 344.5 mm (13.563 in).
Is this solid flywheel balanced?
Yes. LuK solid flywheels are dynamically balanced to eliminate vibration and increase clutch performance.
Does the LuK LFW466 replace number 12579178?
Yes. 12579178 is one of the numbers this flywheel replaces, along with 167584, 19177876 and 4160271100.
Does this clutch flywheel come with the ring gear?
Yes. The ring gear is part of the flywheel. This listing is one flywheel; the clutch disc and pressure plate are separate parts.
