LuK LFW484 clutch flywheel for the 2005-2006 Jeep Wrangler 6-cylinder 4.0L and other vehicles gives the clutch disc a smooth, flat surface to work against. It is a rigid, solid flywheel that comes new, and it carries its own ring gear.
- Smooth, flat friction surface for proper clutch operation
- Dynamically balanced to eliminate vibration and increase clutch performance
- Ring gear with 164 teeth
- New flywheel, offered as an alternative to resurfacing the old one
Quick facts
- Part: LuK LFW484 clutch flywheel
- Fits: 2005-2006 Jeep Wrangler 6-cylinder 4.0L and other vehicles
- Condition: New
A worn or damaged flywheel can show up as a shudder or vibration when the clutch engages, or as a clutch that slips. A worn clutch disc, a weak pressure plate or a problem in the clutch release system can be behind these signs too, so find the cause before buying a flywheel.
Fits
This flywheel fits the 2005-2006 Jeep Wrangler 6-cylinder 4.0L and the 2005-2006 Jeep TJ 6-cylinder 4.0L.
Specifications
Fit and size
- Quantity per vehicle: 1
- Outside diameter: 351 mm (13.819 in)
- Overall casting O.D.: 343.6 mm (13.528 in)
- Ring gear mounting O.D.: 325 mm (12.795 in)
- Friction surface outer diameter: 281 mm (11.063 in)
- Friction surface inner diameter: 168 mm (6.614 in)
- Pilot I.D.: 68.23 mm (2.686 in)
- Crankshaft register diameter: 13.44 mm (0.529 in)
- Crankshaft bolt hole PCD: 94.92 mm (3.737 in)
- Thickness: flywheel 30.1 mm, ring gear 11.4 mm, flange 12.1 mm
- Crank to friction surface: 24.7 mm (0.972 in)
Build and materials
- Type: rigid solid flywheel, dynamically balanced
- Ring gear: 164 teeth
- Dowel pins: none
- Ring gear chamfer: does not match OE
- Condition: New
- Country of origin: Thailand
In the box
One clutch flywheel, without dowel pins. This listing holds one flywheel, and the vehicle takes one.
Interchange: 5 3010 630AB
4160331100
Frequently Asked Questions
Is the LuK LFW484 clutch flywheel right for a 2005-2006 Jeep TJ 6-cylinder 4.0L?
Yes. The LuK LFW484 fits the 2005-2006 Jeep TJ 6-cylinder 4.0L, and it is also listed for the 2005-2006 Jeep Wrangler 6-cylinder 4.0L.
Does the LuK LFW484 flywheel come with dowel pins?
No. This LuK LFW484 clutch flywheel is listed without dowel pins, and the listing is for one flywheel.
How many teeth does the ring gear on this flywheel have?
The ring gear has 164 teeth. It is 11.4 mm (0.449 in) thick, with a mounting O.D. of 325 mm (12.795 in).
Can a shudder when the clutch engages come from the flywheel?
It can, if the friction surface is worn or damaged, but a worn clutch disc or pressure plate can also make the clutch shudder. A shop can inspect the flywheel once the transmission is out.
What size is the friction surface on the LuK LFW484 flywheel?
The friction surface measures 281 mm (11.063 in) outside and 168 mm (6.614 in) inside. The pilot I.D. is 68.23 mm (2.686 in).
