Keep the front suspension solidly connected with the Mevotech Supreme front lower ball joint MK80373 — a ball joint that installs as a direct-fit replacement for the 2002-2007 Mitsubishi Lancer. Positioned in the front lower control arm, it forms the pivoting joint between the control arm and steering knuckle, allowing the wheel to steer and the suspension to travel while holding the connection tight.
- Superior toughness: patented sintered bearings for longer-lasting performance.
- Simple to service: a 90-degree SAE grease fitting is included for easy lubrication.
- Accurate fit: press-fits into the larger flange diameter for an accurate install.
- Fasteners included: an application-specific pinch bolt and locking nut are provided.
Knurling helps the joint seat with a snugger fit between connecting points, resisting distortion and corrosion. Signs the original may need replacing include clunking from the front suspension over bumps, loose or wandering steering, and uneven front tire wear — if a worn front lower ball joint is the cause, this replaces it. Have the suspension diagnosed before ordering, and replace both sides together as a matched pair for balanced handling.
Interchange: ATM 1010523 · ATM 1010524 · 610.46009 · DW-K80373 · 32-16 050 0051
ATM1010523 · ATM1010524 · 61046009 · DWK80373 · 32160500051 · 19291493 · BJ67015 · BJ67015PR · SB7872 · K80373 · IK80373 · FA2277 · 4013A256 · 4013A274 · 4013A404 · 4013A462 · MR403420 · 30010132 · 5051348 · JBJ969 · TK80373
This part cross-references / interchanges with the following part numbers:
19291493, ATM 1010523, ATM 1010524, 610.46009, BJ67015, BJ67015PR, DW-K80373, SB7872, K80373, IK80373, 32-16 050 0051, FA2277, MK80373, 4013A256, 4013A274, 4013A404, 4013A462, MR403420, 30010132, 5051348, JBJ969, TK80373
Frequently Asked Questions
Will the MK80373 ball joint fit a 2002-2007 Mitsubishi Lancer?
It's a direct-fit front lower ball joint for the 2002-2007 Mitsubishi Lancer. Check the "Vehicles it fits" section to confirm the match for your exact vehicle.
Is this a suspension ball joint for the front lower position?
Yes. This suspension ball joint is cataloged for the front lower control arm, where it connects the control arm to the steering knuckle.
What are the signs a ball joint may need replacing?
Clunking from the front suspension over bumps, loose or wandering steering, and uneven front tire wear. Have the cause diagnosed, since these signs can have other sources.
Does it include a grease fitting and mounting fasteners?
Yes. A 90-degree SAE grease fitting is included, along with an application-specific pinch bolt and locking nut for installation.
Should I replace both front ball joints at once?
Replacing both sides together as a matched pair is recommended for balanced, even handling. This listing is for one ball joint.
