Monroe Shocks & Struts 272484 front left strut assembly for the 2008-2011 Toyota Highlander is a single-unit strut replacement that damps ride motion and carries the coil spring. Front struts take the spring load and control body motion over bumps.
- Monroe Quick-Strut unit with the strut, coil spring and upper strut mount preassembled
- Vehicle-specific coil spring, mount and strut design, fit checked and ride tested
- Coil spring calibrated to restore ride height and support the vehicle's weight
- Reduces body sway, vibration and road harshness before it reaches the passenger cabin
- Upper strut mount helps keep steering precise and limits noise, vibration, harshness and memory steer
- Protective coating resists rust and corrosion, and salt spray testing backs it up
Quick facts
- Part: Monroe Shocks & Struts 272484 strut assembly
- Also called: complete strut and coil spring assembly
- Fits: 2008-2011 Toyota Highlander
- Position: Front left
- Condition: New
A worn front strut can show up as oily residue on the strut body, a clunk over bumps or extra body sway. Sway bar links and mounts can make similar noises, so with the engine off, look the strut body over for fluid and the coil spring for cracks before you replace anything.
Fits
This is the 2008-2011 Toyota Highlander strut assembly for the front left side, a direct-fit replacement. The listing is one piece. One goes on each side of the front axle, the front right is a separate part, and both sides are normally replaced together.
Specifications
Fit and size
- Position: front left
- Quantity per application: 1
- Compressed length: 17.15 in (435.6 mm)
- Extended length: 23.76 in (603.5 mm)
- Travel length: 6.61 in
- Body length: 16.61 in
Build and materials
- Type: gas-charged, passive suspension
- Compression and ride height: not adjustable
- Condition: new
- Warranty: Monroe Limited Lifetime Warranty
In the box
One front left strut assembly with the coil spring insulator, strut mount insulator and mounting hardware.
Installation notes
- Comes preassembled as a single unit, so no spring compressor is needed.
- Includes everything required for the strut replacement.
Interchange: 2701505598 · 2701634903 · LS5494541R · 1333319L · G57481 · SR4451 · 34TY1223 · NS272484 · 811690 · 92140795 · 4852080135 · 4852080136 · 4852080137 · 4852080220 · 4852080221 · 4852080222 · 4852080223 · 48520A9530 · 48520A9540 · 48520A9550 · 11617
This part cross-references / interchanges with the following part numbers:
2701505598, 2701634903, LS5494541R, 1333319L, G57481, SR4451, 34TY1223, 272484, NS272484, 811690, 92140795, 4852080135, 4852080136, 4852080137, 4852080220, 4852080221, 4852080222, 4852080223, 48520A9530, 48520A9540, 48520A9550, 11617
Frequently Asked Questions
Is the Monroe Quick-Strut 272484 the right front strut for the 2008-2011 Toyota Highlander?
Yes. Monroe Shocks & Struts 272484 is the front left strut assembly for the 2008-2011 Toyota Highlander. The front right side takes a separate part.
What comes with this Monroe Quick-Strut besides the strut itself?
The assembly includes the coil spring, upper strut mount, coil spring insulator, strut mount insulator and mounting hardware, already put together as one unit.
How long is this front left strut compressed and extended?
This strut measures 17.15 in (435.6 mm) compressed and 23.76 in (603.5 mm) extended, with 6.61 in of travel.
Could clunking over bumps mean this front left strut is worn?
Yes. A worn front left strut can clunk over bumps, show oily residue on its body or let the car sway more, and a shop can confirm the cause.
Does this complete strut and coil spring assembly need a spring compressor?
No. Monroe Quick-Strut 272484 arrives fully assembled, so a spring compressor is not needed for the swap.
