Monroe Shocks & Struts 908913 front strut mount for the 2007-2013 Nissan Altima and other vehicles joins the strut to the body and reduces noise and vibration.
- Strut-Mate mounting kit line, made to complement the ride control characteristics of Monroe struts
- Advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer
- Fit checked and ride tested
Quick facts
- Part: Monroe Shocks & Struts 908913 strut mount
- Also called: suspension strut mount
- Fits: 2007-2013 Nissan Altima and other vehicles
- Position: Front
- Condition: New
A worn mount can show up as clunking or knocking over bumps, noise when you turn the wheel, or vibration through the steering. A worn strut, a tired spring or a worn ball joint can be behind these signs too, so pin down the source before you order. Install the mount whenever conventional struts or springs are replaced.
Fits
This mount is a direct fit for replacing the OE strut mount on the 2007-2013 Nissan Altima and the 2009-2014 Nissan Maxima.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 2
Build and materials
- Product line: Strut-Mate
- Condition: New
- Country of origin: Taiwan
In the box
One strut mount with mounting hardware, bolts and washers. The 2007-2013 Nissan Altima takes two, and both front mounts are normally replaced together. Nuts, bumper, dust boot, bushing, sleeve, spacer, insulator and coil spring seat are not included; plan on new nuts, since old fasteners may not be reusable.
Interchange: 708913
Frequently Asked Questions
Is 908913 the right Nissan Altima strut mount for a 2007-2013 car?
Yes. Monroe Shocks & Struts 908913 is a front strut mount for the 2007-2013 Nissan Altima, and it also fits the 2009-2014 Nissan Maxima.
Does the Monroe 908913 strut mount come with nuts?
No. Monroe Shocks & Struts 908913 comes with mounting hardware, bolts and washers, but the nuts are not included. Plan on new nuts, since old fasteners may not be reusable.
How does the Strut-Mate strut mount reduce memory steer?
This mount uses advanced elastomer technology for enhanced metal-to-rubber bonding. That bonding is what reduces noise, vibration and memory steer.
Can a worn suspension strut mount cause a clunk over bumps?
Yes, a worn mount can be one source of a clunk over bumps or of noise when turning. A shop can inspect the front suspension to confirm which part is responsible.
Does 908913 replace part number 708913?
Yes. Monroe Shocks & Struts 908913 is listed as a replacement for part number 708913.
