Monroe Shocks & Struts 909915 front strut mount for the 2012 Ford Taurus and other vehicles joins the top of the strut to the body and helps reduce noise and vibration. Also called a suspension strut mount, it belongs to the Strut-Mate line.
- Matched to the ride control characteristics of Monroe struts
- Elastomer technology bonds metal to rubber to reduce noise, vibration and memory steer
- Ride tested for quality
Quick facts
- Part: Monroe Shocks & Struts 909915 strut mount
- Also called: suspension strut mount
- Fits: 2012 Ford Taurus and other vehicles
- Position: Front
- Condition: New
A worn strut mount can show up as a clunk or knock over bumps, vibration, or noise when turning. With the engine off, look for cracked or separated rubber at the mount. Worn struts or springs can make similar noises, so find the cause before you replace it.
Fits
The listing covers a wide range of Ford and Lincoln models, including the 2012 Ford Taurus, the 2012 Ford Flex and the 2012 Lincoln MKS. It is a direct fit for replacing the OE strut mount on these vehicles. This listing is one front strut mount; the car takes one on each side of the front axle, and the other side is normally done at the same time. If your car is not named here, look it up in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 2, one per side of the axle
Build and materials
- Product line: Strut-Mate
- Condition: New
- Mounting hardware: included
- Country of origin: Taiwan
In the box
One front strut mount with mounting hardware. Bolts, nuts, washers, a bushing, a bumper, a dust boot, an insulator, a sleeve, a spacer and a coil spring seat are not included, so plan on new bolts and nuts rather than reusing the old ones.
Installation notes
- Install it when replacing conventional struts or springs.
Interchange: 709915
Frequently Asked Questions
Will this Flex mount suit the 2012 Ford Flex?
Yes. Monroe Strut-Mate 909915 is a front strut mount listed for the 2012 Ford Flex, and the car takes one on each side of the front axle. If yours is a different model, look it up in the "Vehicles it fits" section.
Does the Monroe 909915 strut mount come with bolts and nuts?
No. Monroe 909915 comes with mounting hardware, but bolts, nuts, washers, a bushing, a bumper, a dust boot, an insulator, a sleeve, a spacer and a coil spring seat are not included.
Does this Strut-Mate mount help with memory steer?
Yes. Its advanced elastomer technology gives enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer.
Can a clunk over bumps from the front end come from a worn strut mount?
Yes, a worn strut mount can be one source of clunking or knocking over bumps, and of vibration. Have it looked at promptly, since a shop can pinpoint the cause.
Does 709915 interchange with this Monroe strut mount?
Yes. 709915 is listed as an interchange number for Monroe Strut-Mate 909915, so either number points to the same front strut mount.
