Monroe Shocks & Struts 71332 rear suspension strut for the 2001-2016 Audi A4 and other vehicles damps suspension movement to control ride and handling. The unit is gas charged, and its rod extends automatically.
- Monroe OESpectrum line, designed with the right technology for each application to give handling precision and control
- Twin Technology Active Control System isolates impact-related noise, vibration and harshness
- Rod displaced valving, tuned to each vehicle, adjusts to road extremes for a consistent, smooth ride on most applications
- All-weather fluid with special additives to help in extreme temperatures and reduce oil breakdown
- PTFE-banded piston seals evenly between the piston and the pressure tube
- Nitrogen gas charge keeps tire-to-road contact and reduces aeration on most applications
Quick facts
- Part: Monroe Shocks & Struts 71332 suspension strut
- Fits: 2001-2016 Audi A4 and other vehicles
- Position: Rear
- Condition: New
Fluid on the strut body, extra bounce after bumps or a clunk over rough pavement can mean a rear strut is worn. Before you replace it, rule out a worn strut mount, a damaged coil spring or uneven tire wear, which can also bring on noise and handling complaints.
Fits
It fits the 1997-1999 and 2001-2016 Audi A4, the 2001-2009 Audi A4 Quattro and the 2009 Audi S4. These cars take two rear struts, one per side; this listing is a single strut, and both sides are normally replaced together.
Specifications
Fit and size
- Position: rear
- Quantity per vehicle: 2
- Compressed length: 15.625 in (396.9 mm)
- Extended length: 23.5 in (596.9 mm)
- Travel length: 7.875 in
- Body length: 14.25 in
Build and materials
- Type: gas-charged strut, passive suspension
- Adjustment: not adjustable
- Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal, where applicable
- Condition: new
- Warranty: Monroe limited lifetime warranty
- Country of origin: Belgium
In the box
One rear suspension strut with mounting hardware. The strut mount, coil spring and dust shield are not included.
Frequently Asked Questions
Does the Monroe 71332 rear strut fit the 2009 Audi S4?
Yes. Monroe Shocks & Struts 71332 fits the 2009 Audi S4 as a rear strut, and the listing is for the rear position only.
Does this Monroe rear strut come with mounting hardware?
Yes, mounting hardware is included with this rear strut. The strut mount, coil spring and dust shield are not included.
How long is the Monroe 71332 strut compressed and extended?
Monroe 71332 measures 15.625 in (396.9 mm) compressed and 23.5 in (596.9 mm) extended, with 7.875 in of travel.
What can a worn Monroe rear strut feel like on the road?
Extra bounce after bumps, a clunk over rough pavement or fluid on the strut body can mean the strut is worn. Have a shop inspect the suspension promptly if you notice them.
What does the Twin Technology system in this Monroe OESpectrum strut do?
Twin Technology Active Control System delivers control under most driving conditions while isolating impact-related noise, vibration and harshness.
