MOOG Chassis Products RK622101 rear right upper control arm with ball joint for the 2008-2014 Cadillac CTS and other vehicles links the wheel assembly to the chassis and lets the wheel move with the suspension. Sold as a control arm and ball joint assembly, it is built to replace a worn arm in the rear right upper position.
- Engineered for structural strength and corrosion protection
- Optimized rubber bushings for quiet operation and resistance to wear, salt, road grime and oils
- Pre-installed ball joint with a sealed socket for maintenance-free operation
- Heat treated to inhibit premature failure
- Coated studs and an e-coated arm to inhibit premature deterioration
Quick facts
- Part: MOOG Chassis Products RK622101 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2008-2014 Cadillac CTS and other vehicles
- Position: Rear right upper
- Material: Rubber bushings
- Condition: New
A clunk over bumps, uneven tire wear or a loose feel from the rear suspension can mean this arm or its ball joint is worn, though a tired rear shock or a worn wheel bearing may be the source instead, so track down the cause before you buy a new arm. Both sides are normally replaced together. This listing is one arm for the rear right upper position, and the 2008-2014 Cadillac CTS takes one in that spot; the left side is a separate part.
Fits
This arm is a direct-fit replacement for the 2008-2014 Cadillac CTS, the 2005-2011 Cadillac STS and the 2004-2009 Cadillac SRX.
Specifications
Fit and size
- Position: Rear right upper
- Quantity per application: 1
- Maximum length: 13.830 in
- Ball joint mounting type: Press in
- Ball joint stud type: Threaded
- Adjustable: No
Build and materials
- Bushing material: Rubber
- Grade type: Premium
- Condition: New
- Country of origin: Turkey
In the box
One control arm with its bushings, ball joint and mounting hardware. A grease fitting is not included.
Installation notes
- The arm comes pre-greased.
- Precision tolerances are intended to ease installation and steering alignment.
Interchange: 522-488
45D10671 · 62262842 · CB90538PR · CA12636 · 15267620 · 25716354 · 25766118 · CB90538 · CMS501132 · MS501132 · 2607094 · 5CB50387 · 5021458
This part cross-references / interchanges with the following part numbers:
45D10671, 62262842, 522-488, CB90538PR, CA12636, 15267620, 25716354, 25766118, CB90538, CMS501132, MS501132, 2607094, 5CB50387, 5021458
Frequently Asked Questions
Is this the right 2008-2014 Cadillac CTS control arm for the rear right upper position?
Yes. MOOG Chassis Products RK622101 is the rear right upper control arm for the 2008-2014 Cadillac CTS. The left side is a separate part.
Does the MOOG RK622101 control arm come with the ball joint and bushings?
Yes. MOOG Chassis Products RK622101 includes the ball joint, the bushings and mounting hardware. A grease fitting is not included.
What type of ball joint mounting does this rear upper control arm use?
The ball joint is a press-in type with a threaded stud. The arm has a maximum length of 13.830 inches.
How can I tell if the ball joint on this arm is worn?
A clunk over bumps, a loose feel from the rear or tires wearing unevenly can be signs. A shop can check the joint for play.
Does this rear right upper control arm need greasing after installation?
No. The ball joint has a sealed socket for maintenance-free operation, and the arm comes pre-greased.
