MOOG Chassis Products RK622156 front left lower control arm with ball joint for the 2010-2014 Ford Mustang links the left front wheel to the chassis. Sold as a control arm and ball joint assembly, it replaces the arm as one unit.
- Engineered for structural strength and corrosion protection
- Precision tolerances for installation and steering alignment
- Bushings optimized for quiet operation and resistance to wear, salt, road grime and oils
- Sealed ball joint socket for maintenance-free operation
- Heat treated to inhibit premature failure
- Coated studs and e-coated cast iron and steel control arms to inhibit premature deterioration
Quick facts
- Part: MOOG Chassis Products RK622156 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2010-2014 Ford Mustang
- Position: Front left lower
- Condition: New
A clunk over bumps, a loose steering feel or uneven front tire wear can come from worn bushings or a worn ball joint, though other worn suspension parts can show up the same way. Before replacing the arm, look over the bushings and ball joint boot with the engine off for cracks, tears or leaking grease, and leave play testing to a shop.
Fits
Among the 2010-2014 Ford Mustang control arms, this listing is one front left lower arm; the front right is a separate part. The car takes one lower arm on each side of the front axle, and both sides are normally replaced together.
Specifications
Fit and size
- Position: Front left lower
- Quantity per application: 1
Build and materials
- Type: Control arm with ball joint and bushings
- Finish: E-coated cast iron and steel arm, coated studs
- Condition: New
- Country of origin: China
In the box
One control arm with its bushings and ball joint.
Interchange: 524-929
CR3Z3079D · CMS401149 · MCF2310 · 5CB40501 · JTC3444
This part cross-references / interchanges with the following part numbers:
524-929, CR3Z3079D, CMS401149, MCF2310, 5CB40501, JTC3444
Frequently Asked Questions
Is this the lower control arm for the 2010-2014 Ford Mustang front left side?
Yes. MOOG Chassis Products RK622156 is the front left lower control arm with ball joint for the 2010-2014 Ford Mustang; the right side is a separate part.
Does this MOOG control arm come with the ball joint and bushings?
Yes. The ball joint and bushings are included, and the ball joint is pre-installed with a sealed socket for maintenance-free operation.
What coating protects the RK622156 control arm?
The studs are coated, and the cast iron and steel control arms are e-coated to inhibit premature deterioration. MOOG RK622156 is also heat treated to inhibit premature failure.
How can I tell if a front lower control arm is wearing out?
A clunk over bumps, loose steering feel or uneven front tire wear can mean worn bushings or a worn ball joint. A shop can check ball joint play safely.
What are the bushings on the RK622156 designed for?
The bushings are optimized for quiet operation and resistance to wear, salt, road grime and oils.
