MOOG Chassis Products Suspension Control Arm and Ball Joint Assembly P/N:RK622645
MOOG Chassis Products RK622207 front right lower control arm with ball joint for the 2007-2012 Lexus LS460 connects the front right wheel to the chassis and carries the ball joint. Sold as a control arm and ball joint assembly, it is one of the 2007-2012 Lexus LS460 control arms, with the ball joint and bushings included.
A worn arm can show up as a clunk over bumps, uneven front tire wear or a front end that wanders, but worn springs or other suspension parts can produce similar symptoms. Before replacing anything, park the car with the engine off and look at whatever bushing rubber and ball joint boot you can see without lifting it for cracks, splits or grease leakage; a shop can check ball joint play. Front arms are normally replaced as a pair, and this listing is one arm for the front right, so the front left is ordered separately. One goes on each side of the front axle.
This is a direct-fit replacement for the front right lower forward position on the 2007-2012 Lexus LS460.
Fit and size
Build and materials
One control arm with ball joint and bushings, plus mounting hardware. A grease fitting is not included.
Interchange: 524-026
45D10415 · TC6049 · CB64224PR · CA4907 · 6CB86276 · 4862059015 · CB64224 · CMS861074 · MS861074 · 2607105 · 5072454 · JTC2981
This part cross-references / interchanges with the following part numbers:
Which side is this 2007-2012 Lexus LS460 lower control arm for?
It is the front right lower forward arm. The front left is a separate part, so order that side on its own.
Is this a 2007 Lexus LS460 lower control arm, and does it cover later years?
Yes. MOOG Chassis Products RK622207 fits the 2007-2012 Lexus LS460 at the front right lower forward position.
Are the bushings and ball joint included with the MOOG RK622207 control arm?
Yes. MOOG Chassis Products RK622207 comes with the ball joint and bushings, and mounting hardware is included. A grease fitting is not included.
Do I need to grease the ball joint on this MOOG control arm?
No. The ball joint is pre-greased and has a sealed socket made for maintenance-free operation, and no grease fitting is included.
How long is the MOOG RK622207 control arm, and how does its ball joint mount?
Its maximum length is 15.2 in. The ball joint is a press-in type with a threaded stud.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.