MOOG Chassis Products RK622768 front right lower control arm with ball joint for the 2011-2016 Kia Sportage and other vehicles connects the front right wheel to the chassis. The ball joint is pre-installed and the bushings are included.
- Engineered for structural strength and corrosion protection
- Precision tolerances for easy installation and steering alignment
- Optimized rubber bushings for quiet operation and resistance to wear, salt, road grime and oils
- Sealed ball joint socket for maintenance-free operation
- Heat-treated construction to inhibit premature failure
- Coated studs and an e-coated steel arm to inhibit premature deterioration
Quick facts
- Part: MOOG Chassis Products RK622768 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2011-2016 Kia Sportage and other vehicles
- Position: Front right lower
- Material: Stamped steel
- Condition: New
A clunk over bumps, uneven tire wear or a steering wheel that wanders can mean a worn arm or ball joint. Before you replace the arm, rule out worn tie rods, struts or wheel bearings, which can produce similar symptoms. This listing is one arm for the front right; the front left is a separate part, and both sides are normally replaced together.
Fits
This is the lower control arm for the 2010-2015 Hyundai Tucson, and it also fits the 2011-2016 Kia Sportage; each takes one in this position.
Specifications
Fit and size
- Position: Front right lower
- Quantity per vehicle: 1
- Maximum control arm length: 14.5 in
- Ball joint mounting type: Press in
- Ball joint stud type: Pinch
Build and materials
- Control arm material: Stamped steel
- Bushing material: Rubber
- Bushings: Included
- Ball joint: Included
- Grease fitting: Not included
- Condition: New
- Country of origin: China
In the box
One front right lower control arm with the ball joint pre-installed and the bushings included. A grease fitting is not included.
Interchange: 102-7157 · 520-400 · 526-478
TC3017 · TC6044 · CB61078PR · CB63214PR · 545012S100 · 545013W500 · 5CB90403 · 545013W600 · CB63214 · CMS901211
This part cross-references / interchanges with the following part numbers:
102-7157, TC3017, TC6044, 520-400, 526-478, CB61078PR, CB63214PR, 545012S100, 545013W500, 5CB90403, 545013W600, CB63214, CMS901211
Frequently Asked Questions
Is this a Hyundai Tucson control arm for the 2010-2015 model years?
Yes. MOOG Chassis Products RK622768 fits the 2010-2015 Hyundai Tucson and is the front right lower arm for that car.
Does this control arm and ball joint assembly include the bushings?
Yes. The bushings are included and the ball joint comes pre-installed on the arm.
What is the MOOG RK622768 control arm made of?
MOOG RK622768 has a stamped steel arm with rubber bushings. The studs are coated and the steel arm is e-coated.
How can I tell if the front right lower control arm is worn?
Signs can include a clunk over bumps, uneven tire wear or wandering steering. A shop can inspect the bushings and ball joint for wear and play.
Does the ball joint on this control arm need greasing?
No. The ball joint sits in a sealed socket for maintenance-free operation, and no grease fitting is included.
