MOOG Chassis Products RK623685 front right lower control arm with ball joint for the 2013-2018 Hyundai Santa Fe and other vehicles holds the front right wheel to the chassis while the suspension moves. It replaces a worn arm, ball joint and bushings in one piece.
- Studs are induction hardened to resist breakage and improve fatigue life
- Greaseable socket lets new lubricant flush out contaminants
- Pre-installed dust boot seal blocks wear-causing contaminants
- Specially engineered coatings on metal surfaces inhibit deterioration from rain, snow, salt and road grime
- Pre-installed bushings with optimized stiffness inhibit noise
Quick facts
- Part: MOOG Chassis Products RK623685 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2013-2018 Hyundai Santa Fe and other vehicles
- Position: Front right lower
- Condition: New
A clunk over bumps, uneven tire wear, loose steering or a torn boot can mean the ball joint or bushings are worn. Those signs alone do not prove this control arm and ball joint assembly is the problem, since a worn tie rod end can feel similar.
Fits
It also fits the 2013-2019 Hyundai Santa Fe XL and the 2013-2018 Hyundai Santa Fe Sport. This listing is one arm for the front right; the front left is a separate part, and the pair on that axle is normally done at the same time. The 2013-2018 Hyundai Santa Fe takes one arm on the front right.
Specifications
Fit and size
- Position: Front right lower
- Quantity per application: 1
Build and materials
- Type: control arm with ball joint
- Ball joint: included
- Bushings: included
- Condition: New
- Country of origin: China
In the box
One control arm with the ball joint and bushings installed.
Installation notes
- Precision tolerances ease installation and steering alignment.
- All hardware needed for installation is included.
Interchange: 524-718
TC3744 · CB60354PR · 545012W200 · 545012W600 · 545014Z000 · 545014Z500 · CB60354 · CMS901215
This part cross-references / interchanges with the following part numbers:
TC3744, 524-718, CB60354PR, 545012W200, 545012W600, 545014Z000, 545014Z500, CB60354, CMS901215
Frequently Asked Questions
Is this a control arm for the 2013-2018 Hyundai Santa Fe?
Yes. MOOG Chassis Products RK623685 is the front right lower control arm with ball joint for the 2013-2018 Hyundai Santa Fe; the front left side is a separate part.
Is this a lower control arm for the 2013-2018 Hyundai Santa Fe Sport?
Yes. This front right lower control arm fits the 2013-2018 Hyundai Santa Fe Sport.
Does this front right control arm come with the ball joint and hardware?
Yes. MOOG Chassis Products RK623685 has the ball joint and bushings installed, and the hardware needed for installation is included.
Can the ball joint on this control arm be greased?
Yes. The socket on MOOG Chassis Products RK623685 is greaseable, which reduces corrosion and wear by letting fresh lubricant push contaminants out during maintenance.
How are the studs on this control arm hardened?
Induction hardening is applied to the studs to maximize their strength, resist breakage and improve fatigue life.
