MOOG LK147 front left suspension knuckle assembly for the 2015-2018 Mercedes-Benz Sprinter 2500 joins the knuckle, wheel hub and wheel bearing in one pre-assembled unit.
- Pre-assembled with a MOOG knuckle, wheel hub with studs, bearing, axle nut and backing plate
- Bolt-on design that removes the need for special tools or a press when replacing the bearing
- e-Coated backing plate and knuckle for corrosion resistance
- Tested by MOOG engineers throughout design and development
Quick facts
- Part: MOOG LK147 suspension knuckle assembly
- Fits: 2015-2018 Mercedes-Benz Sprinter 2500
- Position: Front left
- Condition: New
A humming or growling noise from the front left wheel, or looseness at that wheel, can mean a worn wheel bearing. These signs alone do not prove this knuckle assembly is the problem; a worn tire can also make noise. Both front sides are normally replaced together, and this listing is one knuckle assembly for the front left.
Fits
This knuckle assembly fits the 2015-2018 Mercedes-Benz Sprinter 2500 and takes one at the front left; the front right side is ordered separately.
Specifications
Fit and size
- Position: Front left
- Quantity per application: 1
Build and materials
- Type: Complete knuckle assembly, pre-assembled
- Coating: e-coated backing plate and knuckle
- Condition: New
- Country of origin: China
In the box
One front left suspension knuckle assembly, with a ball joint where applicable.
Interchange: 2103530572 · 9063304520
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is the MOOG LK147 knuckle assembly the right one for a 2015-2018 Mercedes-Benz Sprinter 2500?
Yes. MOOG LK147 is a front left suspension knuckle assembly for the 2015-2018 Mercedes-Benz Sprinter 2500. The front right side is a separate part.
Does the MOOG LK147 knuckle assembly come with the wheel bearing and hub?
Yes. MOOG LK147 comes pre-assembled with the wheel hub with studs, bearing, axle nut and backing plate, plus a ball joint where applicable.
Is the backing plate on this front left knuckle assembly coated?
Yes. The backing plate and the knuckle are e-coated for corrosion resistance.
What are the signs of a worn wheel bearing on a front knuckle assembly?
A humming or growling noise that changes with speed, or looseness at the wheel, can point to a worn bearing. A shop can measure wheel play and confirm the cause.
Do I need a press to install the MOOG LK147 knuckle assembly?
No. This bolt-on, pre-assembled unit is designed to remove the need for special tools or a press when replacing the bearing.
