MOOG LK025 front left suspension knuckle assembly for the 2004-2007 Toyota Highlander mounts the wheel hub and bearing in one pre-assembled unit. Also called a wheel bearing and hub assembly, it lets you replace the knuckle, hub and bearing together.
- Includes a MOOG knuckle, wheel hub with studs, bearing, axle nut and backing plate
- E-coated backing plate and knuckle for corrosion resistance
- Tested by MOOG engineers throughout design and development
Quick facts
- Part: MOOG LK025 suspension knuckle assembly
- Also called: wheel bearing and hub assembly
- Fits: 2004-2007 Toyota Highlander
- Position: Front left
- Condition: New
A hum or growl that changes with road speed, or vibration felt at the wheel, can mean the bearing is wearing out. These signs alone do not prove this part is at fault; a worn tire can make a similar hum.
Fits
It is a direct-fit wheel bearing replacement for the 2004-2007 Toyota Highlander, on the front left side.
Specifications
Fit and size
- Position: Front left
- Quantity per vehicle: 1 for this side
Build and materials
- Construction: pre-assembled knuckle with wheel hub, bearing and backing plate
- Coating: e-coated backing plate and knuckle
- Condition: New
- Country of origin: China
In the box
One front left knuckle assembly with wheel hub and studs, bearing, axle nut and backing plate. This listing holds one assembly, and the front left side takes one; the front right is a separate part ordered separately.
Installation notes
- Pre-assembled bolt-on unit
- Designed so bearing replacement needs no special tools or press
Interchange: 698-445
4321258020
Frequently Asked Questions
Is this the wheel bearing for the 2004-2007 Toyota Highlander on the front left?
Yes. MOOG LK025 is the front left suspension knuckle assembly for the 2004-2007 Toyota Highlander and includes the wheel bearing. The front right side is a separate part.
What comes pre-assembled on this knuckle assembly?
The knuckle arrives with the wheel hub and studs, bearing, axle nut and backing plate already assembled, so you are not sourcing those pieces separately.
Do I need a press to install the MOOG LK025?
No. MOOG LK025 is a pre-assembled bolt-on unit designed so bearing replacement needs no special tools or press.
Is the knuckle on this assembly coated against rust?
Yes. The knuckle and the backing plate are e-coated for corrosion resistance.
Does this assembly cross-reference to 4321258020?
Yes. 4321258020 is listed as an interchange number for this assembly, along with 698-445.
