MOOG LK060 front right suspension knuckle assembly for the 2004-2010 Toyota Sienna joins the wheel bearing, hub and knuckle in one bolt-on unit. The same part is also called a wheel bearing and hub assembly.
- Pre-assembled knuckle with wheel hub and studs, bearing, axle nut and backing plate, plus a ball joint where applicable
- E-coated backing plate and knuckle for corrosion resistance
- Tested by MOOG engineers throughout design and development
Quick facts
- Part: MOOG LK060 suspension knuckle assembly
- Also called: wheel bearing and hub assembly
- Fits: 2004-2010 Toyota Sienna
- Position: Front right
- Condition: New
A humming or growling noise that changes with speed, looseness at the wheel or vibration can mean a worn wheel bearing. Tires, brake parts or a worn suspension joint can be behind similar noise or vibration too, so find the cause before buying. This listing is one assembly for the front right; the front left is a separate part, and both sides are normally replaced together.
Fits
It fits the 2004-2010 Toyota Sienna, which takes one for the front right. Use it to replace the wheel bearing on the 2004-2010 Toyota Sienna.
Specifications
Fit and size
- Position: front right
- Quantity per vehicle: 1
Build and materials
- Construction: pre-assembled, bolt-on
- Coating: e-coated backing plate and knuckle
- Condition: new
- Country of origin: China
In the box
One front right knuckle assembly, supplied pre-assembled.
Installation notes
- Bolt-on, pre-assembled design meant to make bearing replacement easier.
- Designed to remove the need for special tools or a press.
Interchange: 698-424
4321108010
Frequently Asked Questions
Does the MOOG LK060 fit the 2004-2010 Toyota Sienna?
Yes. MOOG LK060 is the front right suspension knuckle assembly for the 2004-2010 Toyota Sienna. The front left side is a separate part.
Does this knuckle assembly come with the wheel hub and bearing?
Yes. It comes with the knuckle, wheel hub with studs, bearing, axle nut and backing plate, plus a ball joint where applicable.
Do I need a press or special tools to install the MOOG LK060?
No. The MOOG LK060 is a pre-assembled bolt-on unit designed to remove the need for special tools or a press.
How do I tell if a front wheel bearing is going bad?
A humming or growling noise that changes with speed, looseness at the wheel or vibration can mean a worn bearing. A shop can confirm it safely.
Is 4321108010 an interchange number for the MOOG LK060?
Yes. 4321108010 is listed as an interchange number for the MOOG LK060, along with 698-424.
