MOOG Hub Assemblies Wheel Bearing and Hub Assembly P/N:515017
MOOG 512479 rear wheel bearing and hub assembly for the 2009-2020 Dodge Journey holds the rear wheel and lets it turn on the axle. The bearing and hub come as one unit with the wheel studs.
A humming or growling noise that changes with speed, or vibration from a rear wheel, can mean this bearing is worn, though a worn tire or a rear brake rotor can make similar noise. If the bearing is the cause, this assembly replaces the bearing and hub as one unit.
This wheel bearing and hub assembly fits the 2009-2020 Dodge Journey, with one on each side of the rear axle. This listing is one assembly for one rear wheel, and the other side of that axle is normally done at the same time.
Fit and size
Build and materials
One wheel bearing and hub assembly with its ABS sensor.
Is the MOOG 512479 the right wheel bearing for a 2009-2020 Dodge Journey?
Yes. MOOG 512479 is listed for the 2009-2020 Dodge Journey and fits both the rear left and rear right wheels.
Does the MOOG 512479 hub assembly come with an ABS sensor?
Yes. The anti-lock brake sensor is included with MOOG 512479, so the bearing, hub and sensor arrive as one assembly.
What is the bolt circle on this rear hub assembly?
The bolt circle diameter is 127 mm (5 in), with 4 flange bolt holes. The brake pilot diameter is 72.5 mm and the flange diameter is 161.8 mm.
How can I tell if a rear wheel bearing is wearing out?
A hum or growl that rises with road speed, or a vibration felt from one rear wheel, can mean the bearing is worn. A shop can confirm it before parts are replaced.
Do the wheel studs on this MOOG hub assembly have a coating?
Yes. The wheel studs are coated to resist corrosion and rust, which makes them easier to remove and helps with proper torqueing.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.