MOOG 512561 rear wheel bearing and hub assembly for the 2015-2020 Mercedes-Benz GLA250 and other vehicles holds the rear wheel and lets it turn freely on the axle. The bearing is built into the hub, so the two come as one unit.
- Roll form design for consistent, optimal bearing preload
- Bearing raceways and rolling elements matched through tightly controlled manufacturing to minimize noise and vibration
- Performance-proven, quality-tested wheel bearing and hub assembly
- Design enhancements aimed at longer product life and simpler installation and replacement
Quick facts
- Part: MOOG 512561 wheel bearing and hub assembly
- Fits: the 2015-2020 Mercedes-Benz GLA250 and other vehicles
- Position: Rear
- Condition: New
A humming or growling noise that rises with speed, vibration, or play at the wheel can mean a rear bearing is wearing out. These signs alone do not prove the bearing is at fault, since a worn tire can make a similar noise. This listing is one piece, and the rear left and right are normally replaced together.
Fits
This rear wheel bearing and hub assembly fits the 2015-2020 Mercedes-Benz GLA250, the 2013-2019 Mercedes-Benz B250 and the 2014-2019 Mercedes-Benz CLA250. If your car is not named here, open the "Vehicles it fits" section and look up your exact model and engine.
Specifications
Fit and size
- Position: rear
- Quantity per vehicle: 2
- Bolt circle diameter: 112 mm, 4 flange bolt holes
- Brake pilot diameter: 66.9 mm
- Flange diameter: 143 mm
- Flange offset: 64.5 mm
Build and materials
- Condition: new
- Country of origin: Italy
In the box
One wheel bearing and hub assembly; the ABS sensor is not included. The rear axle takes two, one for each side.
Interchange: WKH6786 · 46342 · 2463340006 · VKBA6786
This part cross-references / interchanges with the following part numbers:
WKH6786, 46342, 2463340006, VKBA6786, 512561
Frequently Asked Questions
Is the MOOG 512561 wheel bearing and hub assembly right for a 2015-2020 Mercedes-Benz GLA250?
Yes, MOOG 512561 is a rear wheel bearing and hub assembly for the 2015-2020 Mercedes-Benz GLA250 and the 2013-2019 Mercedes-Benz B250, and the "Vehicles it fits" section covers other models and engines.
Does this MOOG rear wheel bearing and hub assembly come with the ABS sensor?
No, the ABS sensor is not included; this listing is one wheel bearing and hub assembly, and the rear axle takes two.
What is the bolt circle on the MOOG 512561 wheel bearing and hub assembly?
MOOG 512561 has a 112 mm bolt circle diameter with 4 flange bolt holes. Its brake pilot diameter is 66.9 mm and its flange diameter is 143 mm.
What does a worn rear wheel bearing sound like?
A humming or growling noise that changes with speed, or vibration felt from one rear wheel, can mean the bearing is worn. A shop can check the bearing and the hub for play.
How does the roll form design on this wheel bearing and hub assembly help?
The roll form design is intended to give consistent, optimal bearing preload. The raceways and rolling elements are matched to help minimize noise and vibration.
