NGK 24479 O2 sensor for the 2015-2016 Honda CR-V 4-cylinder 2.4L reads oxygen in the exhaust and sends the ECU closed-loop feedback on the air-fuel ratio. That feedback also lets the OBDII system flag possible fuel delivery or catalytic converter efficiency problems.
A tired sensor can show up as a check engine light, rough running or poorer fuel economy. Before you replace it, rule out exhaust leaks, damaged wiring and fuel or ignition faults, since any of those can trigger a similar light or rough idle.
It fits the 2015-2016 Honda CR-V 4-cylinder 2.4L, which takes one; this listing is a single sensor.
Fit and size
Build and materials
Product information is for general reference and may contain errors. See our Disclaimer.
Is this oxygen sensor right for the 2015-2016 Honda CR-V 4-cylinder 2.4L?
Yes. The NGK 24479 fits the 2015-2016 Honda CR-V 4-cylinder 2.4L, and that engine takes one sensor.
Is the NGK 24479 a heated sensor?
Yes. The NGK 24479 is a heated, narrow-band switching zirconia type sensor.
What hex size does the NGK 24479 O2 sensor use?
This O2 sensor has a 7/8" (22mm) hex.
Could a tired O2 sensor hurt fuel economy?
It can contribute. The sensor gives the ECU air-fuel ratio feedback, so a failing one may show up as poorer fuel economy or a check engine light.
What protects the ceramic element in this O2 sensor?
A 3-stage contaminant-resistant plasma jet and deposit trap overcoat covers the ceramic element to guard against element poisoning.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
