Nugeon 99-17680B rear right brake caliper for the 2006-2023 Dodge Charger and other vehicles clamps the brake pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper, also called a disc brake caliper, has a floating design with one piston.
- Phenolic piston, 42 mm in diameter
- Cast iron housing with a rust-preventative finish
- Banjo bolt inlet fitting for the brake line
Quick facts
- Part: Nugeon 99-17680B brake caliper
- Also called: disc brake caliper
- Fits: 2006-2023 Dodge Charger and other vehicles
- Position: Rear right
- Material: Cast iron housing, phenolic piston
- Condition: Remanufactured
Pulling to one side under braking, fluid around the caliper or its dust boot, or a rear wheel that drags can mean a caliper is worn or sticking. Before you replace it, rule out worn pads, a damaged brake hose and sticking slides, since each can also pull or drag.
Fits
This rear right unit is a brake caliper for the 2006-2023 Dodge Charger, the 2005-2023 Chrysler 300 and the 2009-2018 Dodge Challenger. If your car is not named here, look it up in the "Vehicles it fits" section. It is one side only, and the rear left caliper is normally replaced at the same time.
Specifications
Fit and size
- Position: Rear right
- Quantity per vehicle: 1 for this side
- Piston diameter: 42 mm (1.654 in)
- Piston quantity: 1
- Inlet fitting: banjo bolt, 1 banjo bolt
- Inlet port thread: M10-1.5 x 23.14 mm
- Bleeder screw thread: M10-1.5
Build and materials
- Caliper type: Floating
- Casting material: Cast iron
- Piston material: Phenolic
- Finish: Rust preventative
- Housing cast number: K242-049C
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One remanufactured rear right brake caliper with its mounting bracket, caliper slides, dust boots, bleeder screw and crush washers. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap, caliper and pad hardware and the bracket mounting bolts are not included, so plan on new bolts. This listing holds one caliper, and the rear right takes one; the rear left is ordered separately.
Frequently Asked Questions
Does Nugeon 99-17680B work as a brake caliper for the 2006-2023 Dodge Charger?
Yes. Nugeon 99-17680B is the rear right brake caliper for the 2006-2023 Dodge Charger. For another car, look it up in the "Vehicles it fits" section.
What comes with this Nugeon caliper?
Nugeon 99-17680B includes the mounting bracket, slides, dust boots, bleeder screw and crush washers. Brake pads, shims, wear sensors and bracket mounting bolts are not included.
Is the piston on this rear right caliper phenolic?
Yes. This caliper has a single phenolic piston 42 mm (1.654 in) across, in a floating caliper with a cast iron housing.
What can a sticking rear brake caliper feel like?
Pulling to one side when braking, fluid around the caliper or dust boot, or a dragging rear wheel can be signs of a worn or sticking caliper. A shop can test the brake hydraulics.
What inlet fitting does this rear right caliper use?
It uses a banjo bolt inlet fitting with an M10-1.5 x 23.14 mm port thread; this rear right side takes one banjo bolt, and the rear left is a separate part. Crush washers are included.
