Nugeon 97B17947A front right brake caliper for the 2007-2014 Ford Mustang squeezes the pads against the rotor to slow the wheel. This Nugeon brake caliper is remanufactured.
- Fixed caliper with four pistons
- Aluminum casting and aluminum pistons
- Black powder-coated finish
- Banjo bolt inlet fitting with an M10 - 1.5 thread
Quick facts
- Part: Nugeon 97B17947A brake caliper
- Also called: disc brake caliper
- Fits: 2007-2014 Ford Mustang
- Position: Front right
- Material: Aluminum
- Condition: Remanufactured
Pulling to one side, a fluid leak near the wheel or one pad wearing faster than the other can point to a sticking or leaking disc brake caliper, though a hose, pad or rotor problem looks much the same. Before buying, look over the caliper boots and the front right brake hose for dampness or cracks, with the engine off.
Fits
This caliper for the 2007-2014 Ford Mustang is a direct-fit replacement for the front right wheel, which takes one. The front left caliper is a separate part, ordered separately and normally replaced together with this one.
Specifications
Fit and size
- Position: Front right
- Quantity per application: 1
- Piston quantity: 4
- Piston 1 outside diameter: 40 mm (1.575 in)
- Piston 2 outside diameter: 44 mm (1.732 in)
- Inlet fitting: banjo bolt, M10 - 1.5 thread (inlet port M10-1.5 x 26.92 mm)
- Bleeder screw thread: M10 - 1.0
Build and materials
- Caliper type: Fixed
- Casting material: Aluminum
- Piston material: Aluminum
- Finish: Black, powder coated
- Housing cast numbers: 20.9212.02 / 20.8658.00
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One brake caliper with bleeder screw, dust boots, crush washers and mounting hardware. Not included: brake pads, bracket, bracket mounting bolts, mounting bolts, caliper slides, anti-squeal shims, pad hardware, wear sensors and the bleeder screw cap. Plan on new bolts rather than reusing the old ones.
Frequently Asked Questions
Is this Nugeon caliper right for the 2007-2014 Ford Mustang?
Yes. Nugeon 97B17947A is the front right brake caliper for the 2007-2014 Ford Mustang. This listing is one caliper; the front left is a separate part.
Does the Nugeon 97B17947A come with brake pads or the bracket?
No. Nugeon 97B17947A does not include pads, the bracket or its bolts. It comes with a bleeder screw, dust boots, crush washers and mounting hardware.
What size are the pistons in this front right brake caliper?
This fixed caliper has four aluminum pistons, with listed outside diameters of 40 mm (1.575 in) and 44 mm (1.732 in).
What banjo bolt thread does this brake caliper take?
The inlet uses a banjo bolt fitting with an M10 - 1.5 thread. The bleeder screw on this caliper is M10 - 1.0.
What finish does this front right brake caliper have?
The Nugeon 97B17947A is a remanufactured caliper with an aluminum casting and a black powder-coated finish. Its country of origin is Mexico.
