Nugeon 97S00636A rear left brake caliper for the 2014-2022 Infiniti Q50 and other vehicles squeezes the brake pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper takes the place of a worn or leaking one at the rear left wheel.
- Fixed caliper with an aluminum housing
- Two steel pistons, each 41 mm across
- Powder-coated silver finish
- M10-1.0 inlet port thread for the brake line
Quick facts
- Part: Nugeon 97S00636A brake caliper
- Also called: disc brake caliper
- Fits: 2014-2022 Infiniti Q50 and other vehicles
- Position: Rear left
- Material: Aluminum housing, steel pistons
- Condition: Remanufactured
A failing rear left caliper can show up as the car pulling to one side under braking, brake fluid around the piston boots, or a pad that wears faster than the one on the other side. If the caliper is the cause, this one replaces it. A worn pad or a damaged brake hose can feel much the same, so look at those first with the engine off. Replace the calipers on both sides of the axle together; this listing is one.
Fits
This caliper is a direct-fit replacement for the 2014-2022 Infiniti Q50. It also fits the 2017-2019 Infiniti Q60 and, as a 370Z rear caliper, the 2009-2019 Nissan 370Z. Many more vehicles are covered, so if yours is not named here, look for your model and year in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: rear left
- Quantity per vehicle: 1
- Piston outside diameter: 41 mm (1.614 in)
- Piston quantity: 2
- Bleeder screw thread: M10-1.0
- Inlet port thread: M10-1.0
- Housing cast number: 4101
Build and materials
- Caliper type: fixed
- Condition: remanufactured
- Casting material: aluminum
- Piston material: steel
- Finish: powder coated, silver
- Country of origin: Mexico
In the box
One rear left brake caliper with its bleeder screw, dust boots, caliper and pad hardware and crush washers. The rear left takes one caliper, and the right side is a separate part. Brake pads, bracket, bracket bolts, mounting bolts, caliper slides, anti-squeal shims, wear sensors and the bleeder screw cap are not included, so plan on new bolts rather than reusing the old ones.
Frequently Asked Questions
Can I use this 370Z brake caliper on a 2009-2019 Nissan 370Z?
Yes. Nugeon 97S00636A is the rear left caliper for the 2009-2019 Nissan 370Z, so the right rear needs its own caliper.
Will it fit as one of the Q60 brake calipers on a 2017-2019 Infiniti Q60?
Yes. This rear left caliper fits the 2017-2019 Infiniti Q60. The right rear is a separate part.
Does this Nugeon caliper come with brake pads or a bracket?
No. Nugeon 97S00636A includes the bleeder screw, dust boots, caliper and pad hardware and crush washers, but not pads, a bracket, mounting bolts or the bleeder screw cap.
What thread size does this disc brake caliper use for the bleeder screw?
The included bleeder screw is M10-1.0. The inlet port for the brake line is also M10-1.0.
How can I tell if this rear left caliper is leaking?
During a brake service, look for wet fluid around the piston boots or the inlet fitting, or for a pad worn unevenly. A brake fluid leak needs a shop's attention promptly.
