Rear Left Brake Caliper for 2003-2008 Infiniti FX35 & More - Nugeon 99-00618A

Be the first to review this product
$197.99
MPN: 99-00618A
Item Package Code: EA
Part Has Core (Y/N): N
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Nugeon Disc Brake Caliper P/N:99-00618A
Nugeon Disc Brake Caliper P/N:99-00618A
$197.99

Nugeon 99-00618A rear left brake caliper for the 2003-2008 Infiniti FX35 and other vehicles squeezes the pads against the rotor to slow the wheel. This remanufactured disc brake caliper has a floating design.

  • Loaded with mounting bracket, caliper slides, dust boots and caliper and pad hardware
  • Single 43 mm steel piston in a cast iron housing
  • Banjo bolt inlet with M10 - 1.0 thread and crush washers included
  • Bleeder screw and bleeder screw cap included, with M7-1.0 thread
  • Rust preventative finish on the caliper

Quick facts

  • Part: Nugeon 99-00618A brake caliper
  • Also called: disc brake caliper
  • Fits: 2003-2008 Infiniti FX35 and other vehicles
  • Position: Rear left
  • Material: Cast iron housing, steel piston
  • Condition: Remanufactured

A brake that drags, a pull to one side under braking or fluid at the wheel can mean a caliper is leaking or sticking. Worn pads, a worn rotor or a damaged brake hose can be behind the same signs, so find the cause before buying. This listing is one caliper; the rear right is a separate part, and both rear sides are normally replaced together. The rear axle takes one caliper on each side.

Fits

This caliper fits the 2003-2008 Infiniti FX35 and the 2003-2008 Infiniti FX45.

Specifications

Fit and size

  • Position: Rear left
  • Quantity: 1 per rear left position
  • Piston diameter: 43 mm (1.69 in)
  • Piston quantity: 1
  • Inlet fitting: banjo bolt, M10 - 1.0 thread
  • Bleeder screw thread: M7-1.0

Build and materials

  • Caliper type: Floating
  • Housing material: Cast iron
  • Piston material: Steel
  • Finish: Rust preventative
  • Condition: Remanufactured
  • Housing cast number: 4311
  • Bracket cast numbers: 4311 3512
  • Country of origin: Mexico

In the box

One caliper with its bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw with cap and crush washers. Brake pads, bracket mounting bolts, anti-squeal shims and wear sensors are not included; plan on new bracket bolts, since the old ones may not be reusable.

Frequently Asked Questions

Are these calipers for the 2003-2008 Infiniti FX35 rear left or rear right?

They are rear left. Nugeon 99-00618A is the rear left caliper for the 2003-2008 Infiniti FX35 and the 2003-2008 Infiniti FX45; the rear right side is a separate part.

Does this Nugeon brake caliper come with brake pads?

No. This Nugeon 99-00618A caliper comes with its bracket, slides, dust boots, pad hardware and bleeder screw; pads, bracket bolts, shims and wear sensors are not included.

Which banjo bolt thread and bleeder screw size does this Nugeon caliper use?

The inlet fitting is a banjo bolt with M10 - 1.0 thread, and the bleeder screw is M7-1.0. Crush washers are included.

How do I tell if a rear left caliper is sticking or leaking?

A brake that drags, a pull to one side under braking or fluid at the wheel can mean a leaking or sticking caliper. A shop can test it, since brakes are a safety system.

What is the housing and finish of this rear left caliper?

The housing is cast iron with a rust preventative finish, and the piston is steel. Nugeon 99-00618A is a remanufactured floating caliper.