Nugeon 99-00831A front right brake caliper for the 2006-2010 Hyundai Sonata and other vehicles clamps the pads against the rotor to slow the wheel. This caliper is remanufactured.
- Floating caliper design with one 60 mm piston
- Cast iron housing with a steel piston
- Rust-preventative finish on the caliper
- Banjo bolt inlet fitting for the brake line
Quick facts
- Part: Nugeon 99-00831A brake caliper
- Also called: disc brake caliper
- Fits: 2006-2010 Hyundai Sonata and other vehicles
- Position: Front right
- Material: Cast iron housing, steel piston
- Condition: Remanufactured
A sticking or leaking front caliper can show up as the car pulling to one side, one front pad wearing faster than the other, or brake fluid near the wheel. Worn pads, a damaged brake hose or a worn rotor can be behind those signs too, so find the cause before replacing the caliper.
Fits
This is a brake caliper for the 2006-2010 Hyundai Sonata and the 2006-2011 Hyundai Azera, and the front right wheel takes one. The listing is a single caliper; the front left is a separate part, and both sides are normally replaced together.
Specifications
Fit and size
- Position: Front right
- Quantity per application: 1
- Piston diameter: 60 mm (2.362 in)
- Piston quantity: 1
- Bleeder screw thread: M10-1.0
- Inlet port thread: M10-1.0 x 23.4
Build and materials
- Caliper type: Floating
- Casting material: Cast iron
- Piston material: Steel
- Finish: Rust preventative
- Housing cast number: BC141093
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One remanufactured front right brake caliper with its mounting bracket, caliper slides, dust boots, bleeder screw and crush washers. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap, the bracket mounting bolts and the caliper and pad hardware are not included, so plan on new bolts.
Frequently Asked Questions
Will the Nugeon 99-00831A caliper work on a 2006-2011 Hyundai Azera?
Yes. Nugeon 99-00831A is a front right brake caliper for the 2006-2011 Hyundai Azera. The front left side is a separate part.
Does this disc brake caliper come with the bracket and slides?
Yes. It includes the mounting bracket, caliper slides, dust boots, bleeder screw and crush washers. Brake pads, shims, wear sensors and the bracket mounting bolts are not included.
What size is the piston on this Nugeon brake caliper?
Nugeon 99-00831A has a single steel piston, 60 mm (2.362 in) across, in a floating caliper design.
How do I tell if a front brake caliper is dragging or leaking?
A dragging caliper can show as pulling to one side, a front pad worn faster than the other, or brake fluid around the wheel. A shop can inspect the slides, dust boot and piston.
Does the Nugeon caliper come with a bleeder screw?
Yes, the bleeder screw is included, but the bleeder screw cap is not. The screw is M10-1.0, and the banjo bolt inlet port is M10-1.0 x 23.4.
