Nugeon 99-00872A rear right brake caliper for the 2012-2017 Hyundai Accent clamps the brake pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper mounts on the rear right wheel.
- Floating caliper with one steel piston
- Cast iron housing with a rust preventative finish
- Banjo inlet fitting with an M10-1.0 x 23.4 mm port thread
- Housing cast number BC140182 and bracket cast number BC412178
Quick facts
- Part: Nugeon 99-00872A brake caliper
- Also called: disc brake caliper
- Fits: 2012-2017 Hyundai Accent
- Position: Rear right
- Material: Cast iron
- Condition: Remanufactured
A sticking caliper can show up as a pull to one side, a dragging rear wheel or uneven pad wear. Before you replace this caliper, rule out worn pads, a seized slide pin or a damaged brake hose, because other parts can produce those symptoms too. The rear axle has one caliper on each side. This listing is one caliper for the right side, the left is a separate part, and both are normally replaced together.
Fits
It is a direct-fit replacement caliper for the 2012-2017 Hyundai Accent.
Specifications
Fit and size
- Position: Rear right
- Quantity per application: 1
- Piston diameter: 34 mm (1.339 in)
- Piston 1 outside diameter: 33.78 mm (1.33 in)
- Piston quantity: 1
- Inlet fitting: Banjo, M10-1.0 x 23.4 mm port thread
- Bleeder screw thread: M10-1.0
Build and materials
- Caliper type: Floating
- Casting material: Cast iron
- Piston material: Steel
- Finish: Rust preventative
- Condition: Remanufactured
- Caliper manufacturer: Mando
- Country of origin: Mexico
In the box
One remanufactured brake caliper with its bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw and crush washer. Brake pads, anti-squeal shims, wear sensors, a bleeder screw cap and mounting bolts are not included, so plan on new mounting bolts.
Interchange / FMSI:
FMSI: D1544
Frequently Asked Questions
Is this Nugeon caliper right for the 2012-2017 Hyundai Accent?
Yes. Nugeon 99-00872A is the rear right caliper for the 2012-2017 Hyundai Accent, and the left side takes a separate part.
Do I get brake pads or a bracket with Nugeon 99-00872A?
Nugeon 99-00872A comes with its bracket, slides, dust boots, hardware and bleeder screw. Brake pads, anti-squeal shims, wear sensors and mounting bolts are not included.
Is this disc brake caliper a floating or fixed type?
This rear right caliper is a floating type with one steel piston, 34 mm (1.339 in) in diameter.
What can I look for on a rear caliper during a brake service?
During a brake service, signs can include fluid around the caliper, a torn dust boot or heavy corrosion on the caliper. A shop can test whether the caliper is the cause.
What thread does the banjo fitting use on this caliper?
The inlet port thread is M10-1.0 x 23.4 mm for the banjo fitting, and the bleeder screw thread is M10-1.0.
