Rear Left Brake Caliper for 2017-2024 Honda CR-V - Nugeon 99-01046B

$189.99
WARNING:California Proposition 65▾

Vehicles this part fits

    $189.99
    Adding to cart… The item has been added

    Have questions?

    Part number: 99-01046B
    Part Has Core (Y/N): N
    Nugeon Disc Brake Caliper P/N:99-01046B
    Nugeon Disc Brake Caliper P/N:99-01046B
    $189.99
    $189.99

    Nugeon 99-01046B rear left brake caliper for the 2017-2024 Honda CR-V clamps the brake pads against the rotor to slow the rear left wheel. This remanufactured Nugeon brake caliper replaces the unit at that wheel when the original sticks or leaks.

    • Floating caliper with a single steel piston 38 mm in diameter
    • Cast iron caliper housing
    • Rust preventative finish
    • Banjo inlet fitting with an M10-1.0 inlet port thread

    Quick facts

    • Part: Nugeon 99-01046B brake caliper
    • Also called: disc brake caliper
    • Fits: 2017-2024 Honda CR-V
    • Position: Rear left
    • Material: Cast iron housing, steel piston
    • Condition: Remanufactured

    A worn or failing caliper can show up as the car pulling to one side under braking, a brake that drags, or brake fluid around the caliper. Before you replace this caliper, rule out worn pads, seized slides and a collapsed brake hose, since those can also make a car pull or drag.

    Fits

    This is a direct-fit replacement caliper for the 2017-2024 Honda CR-V. Rear calipers are normally replaced together, but this listing is one caliper for the rear left, and the rear right is a separate part. On the 2017-2024 Honda CR-V, the rear left wheel takes one of these calipers.

    Specifications

    Fit and size

    • Position: rear left
    • Quantity per application: 1
    • Piston diameter: 38 mm (1.496 in)
    • Piston outside diameter: 37.97 mm (1.5 in)
    • Inlet port thread: M10-1.0
    • Bleeder screw thread: M10-1.25
    • Housing cast number: 11CLEP TLA
    • Bracket cast number: 16SN-10T

    Build and materials

    • Condition: remanufactured
    • Caliper type: floating
    • Housing material: cast iron
    • Piston material: steel
    • Finish: rust preventative
    • Inlet fitting: banjo
    • Caliper manufacturer: Nissin
    • Country of origin: Mexico

    In the box

    One remanufactured brake caliper with its bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw, one banjo bolt and crush washers. Brake pads, anti-squeal shims, the bleeder screw cap, a grease pack and the bracket mounting bolts are not included, so plan on new bolts.

    Interchange / FMSI:

    FMSI: D2037

    Frequently Asked Questions

    Is this the rear left caliper for the 2017-2024 Honda CR-V?

    Yes. Nugeon 99-01046B is the rear left brake caliper for the 2017-2024 Honda CR-V. The rear right caliper is a separate part.

    Are brake pads included with this Nugeon caliper?

    No, pads are not included, and neither are anti-squeal shims or bracket mounting bolts. This caliper does come with its bracket, slides, dust boots, caliper and pad hardware, bleeder screw, banjo bolt and crush washers.

    Is this disc brake caliper a floating or fixed type?

    Floating. Nugeon 99-01046B has one steel piston 38 mm (1.496 in) across in a cast iron housing with a rust preventative finish.

    What thread does the bleeder screw on the Nugeon 99-01046B use?

    The bleeder screw thread is M10-1.25, and the banjo inlet port is M10-1.0. The bleeder screw is included with the caliper, but its cap is not.

    Can I keep driving if a rear caliper is leaking brake fluid?

    No. A fluid leak at a caliper can affect braking, so have the brakes inspected and the caliper replaced promptly.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review