Front Left Brake Caliper for 2007-2009 Chevrolet Equinox & More - Nugeon 99-01419A

$126.99
WARNING:California Proposition 65▾

Vehicles this part fits

    Part number: 99-01419A
    UPC: 736749369046
    Condition: New
    Weight: 14.50 LBS
    Item Package Code: EA
    Part Has Core (Y/N): N
    Item Package Quantity: 1
    $126.99
    Adding to cart… The item has been added

    Have questions?

    Nugeon Disc Brake Caliper P/N:99-01419A
    Nugeon Disc Brake Caliper P/N:99-01419A
    $126.99
    $126.99

    Nugeon 99-01419A front left brake caliper for the 2007-2009 Chevrolet Equinox and other vehicles clamps the brake pads against the rotor to slow the wheel. As a remanufactured Nugeon brake caliper, it replaces a front left unit that has seized or started to leak.

    • Floating caliper design with two pistons
    • Steel pistons, 45 mm in diameter
    • Nugeon caliper housing is cast iron with a rust-preventative finish
    • Banjo bolt inlet with an M10-1.5 thread and an M10-1.0 bleeder screw

    Quick facts

    • Part: Nugeon 99-01419A brake caliper
    • Also called: disc brake caliper
    • Fits: 2007-2009 Chevrolet Equinox and other vehicles
    • Position: Front left
    • Material: Cast iron
    • Condition: Remanufactured

    A caliper that sticks or leaks can show up as a pull to one side, fluid around the dust boot or pads that wear unevenly. These signs alone do not prove the caliper is at fault; a worn brake hose can cause a pull too.

    Fits

    Besides the 2007-2009 Chevrolet Equinox, the vehicles it fits include the 2012-2015 Chevrolet Captiva Sport and the 2008-2010 Saturn Vue. If your car is not named here, open the "Vehicles it fits" section to check your exact model and engine. Each side of the front axle takes one caliper; this listing is the front left, the front right is a separate part, and the other side of that axle is normally done at the same time.

    Specifications

    Fit and size

    • Position: Front left
    • Quantity per application: 1
    • Pistons: 2, each 45 mm (1.772 in) in diameter
    • Inlet: banjo bolt, M10-1.5 x 23.14 mm thread
    • Bleeder screw thread: M10-1.0
    • Housing cast number: BC140107

    Build and materials

    • Caliper type: Floating
    • Condition: Remanufactured
    • Housing material: Cast iron
    • Piston material: Steel
    • Finish: Rust preventative
    • Country of origin: Mexico

    In the box

    One caliper with its bracket, caliper slides, dust boots, bleeder screw and crush washers. Brake pads, bracket mounting bolts, mounting bolts, anti-squeal shims, pad hardware, wear sensors and the bleeder screw cap are not included, so plan on new bolts rather than reusing the old ones.

    Frequently Asked Questions

    Is this the Chevy Equinox brake caliper for a 2007-2009 model?

    Yes. Nugeon 99-01419A is the front left caliper for the 2007-2009 Chevrolet Equinox; the front right side is a separate part.

    Is this front left Saturn Vue brake caliper right for the 2008-2010 model?

    Yes, Nugeon 99-01419A fits the 2008-2010 Saturn Vue on the front left side. For other cars, open the "Vehicles it fits" section.

    Are brake pads included with this remanufactured caliper?

    No, brake pads are not included; the caliper comes with its bracket, slides, dust boots, bleeder screw and crush washers, but not bracket mounting bolts or anti-squeal shims.

    What size are the pistons and the bleeder thread on this caliper?

    The two steel pistons are 45 mm (1.772 in) in diameter, and the bleeder screw thread is M10-1.0.

    How do I tell if a disc brake caliper is sticking or leaking?

    Look for brake fluid around the dust boot, a pull to one side under braking or a brake that drags. A shop can test a caliper you suspect.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review