Nugeon 99-02401A rear right brake caliper for the 2007-2015 Mini Cooper clamps the brake pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper, also called a disc brake caliper, pushes its piston with hydraulic pressure from the brake line.
- Floating caliper design with one steel piston, 36.02 mm in diameter
- Aluminum caliper casting
- Rust-preventative finish
- M10-1.0 thread on both the bleeder screw and the line inlet port
Quick facts
- Part: Nugeon 99-02401A brake caliper
- Also called: disc brake caliper
- Fits: 2007-2015 Mini Cooper
- Position: Rear right
- Material: Aluminum caliper casting, steel piston
- Condition: Remanufactured
Pulling to one side, a burning smell after a drive or uneven pad wear can mean a caliper is sticking. A worn rotor, worn pads or a swollen brake hose can be behind those signs too, so track down the cause before you buy.
Fits
It fits the rear right wheel of the 2007-2015 Mini Cooper, and that wheel takes one caliper. Plan to replace the rear pair together; this listing is one caliper, and the rear left is a separate part.
Specifications
Fit and size
- Position: rear right
- Quantity per application: 1
- Piston diameter: 36.02 mm (1.42 in)
- Piston quantity: 1
- Bleeder screw thread: M10-1.0
- Inlet port thread: M10-1.0
- Banjo bolt quantity: 1
- Housing cast numbers: 1956, 36
Build and materials
- Caliper type: floating
- Condition: remanufactured
- Casting material: aluminum
- Piston material: steel
- Finish: rust preventative
- Country of origin: Mexico
In the box
One remanufactured rear right brake caliper with its mounting bracket, caliper slides, caliper and pad hardware, dust boots, bleeder screw and crush washers. Brake pads, anti-squeal shims, wear sensors, a bleeder screw cap, bracket mounting bolts and the mounting bolt are not included; plan on new bolts, since the old ones may not be reusable.
Frequently Asked Questions
Is this the rear caliper for the 2007-2015 Mini Cooper?
Yes, Nugeon 99-02401A fits the 2007-2015 Mini Cooper on the rear right wheel only; the rear left takes its own caliper.
Does the Nugeon caliper come with brake pads?
No, brake pads, anti-squeal shims and wear sensors are not included, but Nugeon 99-02401A does include the bracket, caliper slides, dust boots and bleeder screw.
What thread size is the bleeder screw on this brake caliper?
The bleeder screw is M10-1.0, the same thread as the line inlet port. The bleeder screw is included, but its cap is not.
What is the piston size on this floating brake caliper?
The single steel piston measures 36.02 mm (1.42 in) in diameter. It sits in an aluminum casting with a rust-preventative finish.
Do I need to buy bracket bolts separately for this caliper?
Yes, the bracket mounting bolts and the mounting bolt are not included, so plan on new ones because old bolts may not be reusable; the bracket itself comes with the caliper.
