Nugeon 99-17310B front right brake caliper for the 2002-2006 Buick Rendezvous and other vehicles clamps the brake pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper has a floating design.
- One 64 mm (2.52 in) piston per caliper
- Phenolic piston material
- Cast iron caliper housing with a rust preventative finish
- Banjo bolt inlet fitting with an M10 - 1.5 inlet thread
Quick facts
- Part: Nugeon 99-17310B brake caliper
- Also called: disc brake caliper
- Fits: 2002-2006 Buick Rendezvous and other vehicles
- Position: Front right
- Material: Cast iron caliper casting, phenolic piston
- Condition: Remanufactured
A caliper, also called a disc brake caliper, that is failing can show up as the vehicle pulling to one side under braking, a pad wearing faster on one side or brake fluid around the wheel. A worn rotor, worn pads or a damaged brake hose can be behind those signs too, so find the cause before you buy. Both front calipers are normally replaced together; this listing is one caliper for the front right, and the front left is a separate part.
Fits
Besides the 2002-2006 Buick Rendezvous, the vehicles it fits include the 2001-2005 Pontiac Aztek and the 2002-2004 Chevrolet Venture. If your car is not named here, look it up by year and model in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Front right
- Quantity per vehicle: 1 for this side
- Piston diameter: 64 mm (2.52 in)
- Piston quantity: 1
- Inlet fitting: banjo bolt, quantity 1
- Inlet port thread: M10-1.5 x 23.14 mm
- Bleeder screw thread: M10-1.0
- Housing cast number: 1353987
Build and materials
- Caliper type: Floating
- Casting material: Cast iron
- Piston material: Phenolic
- Finish: Rust preventative
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One brake caliper with its mounting bracket, caliper slides, dust boots, bleeder screw, crush washers and mounting hardware. This listing holds one caliper, and the front right takes one. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap, caliper and pad hardware, the bracket mounting bolts and the mounting bolt are not included; plan on new bolts, since the old ones may not be reusable.
Frequently Asked Questions
Is this the right 2002-2006 Buick Rendezvous brake caliper?
Yes. Nugeon 99-17310B is the front right caliper for the 2002-2006 Buick Rendezvous. The front left is a separate part.
Does the Nugeon caliper fit the 2001-2005 Pontiac Aztek?
Yes. Nugeon 99-17310B fits the 2001-2005 Pontiac Aztek on the front right side. For another car, look up its year and model in the "Vehicles it fits" section.
Does this caliper come with a bracket and brake pads?
This caliper includes the mounting bracket, slides, dust boots, bleeder screw and crush washers. Brake pads, anti-squeal shims and wear sensors are not included.
What size is the piston and the inlet thread?
The single phenolic piston is 64 mm (2.52 in) across. The inlet port thread is M10-1.5 x 23.14 mm with a banjo bolt fitting.
Is this front right caliper a floating or fixed design?
This front right caliper is a floating design with the caliper slides included. The housing is cast iron and carries cast number 1353987.
