Nugeon 99-17408B rear left brake caliper for the 2009-2017 Chevrolet Traverse and other vehicles presses the brake pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper is a floating design with one piston.
- Aluminum casting for the caliper housing
- Rust preventative finish on the caliper
- Phenolic piston material
- Banjo bolt inlet fitting with an M10 - 1.0 thread
Quick facts
- Part: Nugeon 99-17408B brake caliper
- Also called: disc brake caliper
- Fits: 2009-2017 Chevrolet Traverse and other vehicles
- Position: Rear left
- Material: Aluminum
- Condition: Remanufactured
A sticking or leaking caliper can show as a burning smell, uneven pad wear or fluid around the dust boot. During a brake service, inspect the boot and hose and measure the pads, since a worn pad or hose can cause similar signs. Rear calipers are normally replaced as a pair; this listing is one rear left caliper, and the rear right is ordered separately.
Fits
This disc brake caliper for the rear left wheel also fits the 2007-2016 GMC Acadia and the 2008-2017 Buick Enclave, with one caliper per rear left position.
Specifications
Fit and size
- Position: Rear left
- Quantity per application: 1
- Piston outside diameter: 48 mm (1.89 in)
- Piston quantity: 1
- Inlet thread size: M10 - 1.0
- Bleeder screw thread: M10-1.0
Build and materials
- Caliper type: Floating
- Casting material: Aluminum
- Piston material: Phenolic
- Finish: Rust preventative
- Housing cast number: BC140109
- Bracket cast number: L 1606977 M1 M2 M3
- Caliper manufacturer: Mando
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One brake caliper with its mounting bracket, caliper and pad hardware, caliper slides, dust boots, bleeder screw with cap and crush washers. Pads, wear sensors, anti-squeal shims and bracket mounting bolts are not included, so plan on new bracket bolts since the old ones may not be reusable.
Interchange / FMSI:
FMSI: D883
Frequently Asked Questions
Is this the brake caliper for a 2007-2016 GMC Acadia?
Yes, Nugeon 99-17408B is a rear left caliper that fits the 2007-2016 GMC Acadia. If your car is not one named here, look it up in the "Vehicles it fits" section with your year and model.
Does the Nugeon caliper come with the bracket and bleeder screw?
Yes, Nugeon 99-17408B includes the mounting bracket, caliper slides, dust boots, hardware, bleeder screw with cap and crush washers. Pads, wear sensors, anti-squeal shims and bracket mounting bolts are not included.
What piston size and material does this rear left caliper have?
This caliper has one phenolic piston with a 48 mm (1.89 in) outside diameter, in a floating design.
Could a soft pedal or grinding from the rear mean this brake caliper is failing?
Possibly. A grinding noise, a soft pedal or a low brake fluid level can all have other causes, and a failing caliper can be one. Have a shop check the brakes promptly, since they are a safety system.
What thread sizes do the bleeder screw and inlet use on this caliper?
The bleeder screw is M10-1.0, and the inlet is a banjo bolt fitting with an M10 - 1.0 thread.
