Nugeon 99-17753B rear left brake caliper for the 2011-2018 Ram 2500 and other vehicles clamps the brake pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper turns brake fluid pressure into clamping force at the rear left wheel.
- Floating caliper design with two pistons, each 45 mm (1.77 in) in diameter
- Phenolic pistons in a cast iron caliper body
- Rust-preventative finish on the caliper
- Banjo bolt inlet with an M10-1.0 thread
Quick facts
- Part: Nugeon 99-17753B brake caliper
- Also called: disc brake caliper
- Fits: 2011-2018 Ram 2500 and other vehicles
- Position: Rear left
- Material: Cast iron caliper, phenolic pistons
- Condition: Remanufactured
Pulling to one side, a dragging wheel, uneven pad wear or brake fluid at the wheel can mean a disc brake caliper is worn or sticking, though a collapsed brake hose or a warped rotor can be behind them, so find the cause before you replace it. This listing is one caliper for the rear left; the rear right is a separate part, and both are normally replaced together.
Fits
This rear left caliper is a direct-fit replacement for the 2011-2018 Ram 2500, the 2009-2010 Dodge Ram 2500 and the 2011-2018 Ram 3500, and it fits other vehicles too. If your truck is not named here, open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: Rear left
- Quantity per vehicle: 1 for this position
- Piston diameter: 45 mm (1.77 in)
- Piston quantity: 2
- Inlet fitting: Banjo bolt, port thread M10-1.0 x 23.4
- Bleeder screw thread: M10-1.0
- Housing cast number: 15884101
- Bracket cast number: 16277701
Build and materials
- Caliper type: Floating
- Caliper material: Cast iron
- Piston material: Phenolic
- Finish: Rust preventative
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One remanufactured rear left caliper with its mounting bracket, caliper and pad hardware, slides, dust boots, crush washers, and bleeder screw with cap. This listing holds one caliper, and the rear left takes one. Brake pads, anti-squeal shims and wear sensors are not included, and neither are the bracket and caliper mounting bolts, so plan on new bolts rather than reusing the old ones.
Interchange / FMSI:
FMSI: D1400
Frequently Asked Questions
Is the Nugeon 99-17753B a 2011-2018 Ram 2500 brake caliper for the rear left side?
Yes. Nugeon 99-17753B is a rear left caliper for the 2011-2018 Ram 2500. The rear right takes its own caliper.
Is this rear left unit a 2011-2018 Ram 3500 brake caliper too?
Yes. Nugeon 99-17753B is also listed for the 2011-2018 Ram 3500, in the rear left position.
Does the Nugeon caliper come with brake pads?
No. This remanufactured caliper comes with its bracket, hardware, slides, dust boots, bleeder screw and cap, but not pads, shims or wear sensors.
What thread does the inlet on this rear left caliper take?
The inlet is a banjo bolt fitting with an M10-1.0 x 23.4 port thread. The bleeder screw is M10-1.0.
Are mounting bolts included with this remanufactured caliper?
No. The bracket mounting bolts and the caliper mounting bolts are not included, so plan on new bolts rather than reusing the old ones.
