Nugeon 99-17972A front left brake caliper for the 2011-2019 Ford Fiesta presses the brake pads against the rotor to slow the wheel. This Nugeon brake caliper is remanufactured, with a cast iron body and a rust preventative finish.
- Floating caliper with a single steel piston, 54 mm (2.13 in) outside diameter
- Mounting bracket, caliper slides and dust boots included
- Bleeder screw with cap included, M10-1.0 thread
- Banjo bolt inlet fitting with crush washers included
Quick facts
- Part: Nugeon 99-17972A brake caliper
- Also called: disc brake caliper
- Fits: 2011-2019 Ford Fiesta
- Position: Front left
- Material: Cast iron
- Condition: Remanufactured
Pulling to one side under braking, a brake that drags or fluid weeping near the dust boot can mean a worn disc brake caliper, though a collapsed brake hose or worn pads can be behind the same signs, so find the cause before replacing anything.
Fits
It fits the 2011-2019 Ford Fiesta. This listing is one caliper for the front left, with one on each side of the front axle; the front right is ordered separately and is normally replaced at the same time.
Specifications
Fit and size
- Position: Front left
- Quantity per application: 1
- Piston outside diameter: 54 mm (2.13 in)
- Piston quantity: 1
- Bleeder screw thread: M10-1.0
- Inlet fitting: banjo bolt, M10 - 1.0 thread
Build and materials
- Caliper type: Floating
- Condition: Remanufactured
- Casting material: Cast iron
- Piston material: Steel
- Finish: Rust preventative
- Country of origin: Mexico
In the box
One remanufactured brake caliper with its mounting bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw with cap and crush washers. Brake pads, anti-squeal shims, wear sensors and the bracket mounting bolts are not included; plan on new bolts rather than reusing the old ones.
Interchange / FMSI:
FMSI: D1454
Frequently Asked Questions
Is this front left caliper right for the 2011-2019 Ford Fiesta?
Yes. Nugeon 99-17972A is a front left caliper for the 2011-2019 Ford Fiesta. The front right side takes its own separate caliper.
Does the Nugeon caliper come with brake pads?
No. Pads, anti-squeal shims, wear sensors and bracket mounting bolts are not included. The caliper comes with its bracket, slides, dust boots, hardware, bleeder screw and crush washers.
What are the piston and bleeder screw sizes on this brake caliper?
Nugeon 99-17972A has one steel piston, 54 mm (2.13 in) in outside diameter, and an M10-1.0 bleeder screw with a cap. It is a floating caliper with a banjo bolt inlet.
How can I tell if a front caliper is sticking or leaking?
Fluid near the dust boot, a car that pulls to one side when braking, or a brake that seems to drag can mean the caliper is worn. A shop can test a sticking caliper.
Is the Nugeon 99-17972A new or remanufactured?
Remanufactured. This caliper has a cast iron body, a rust preventative finish and Mexico as its country of origin.
