TERREPOWER 99-18044A front right brake caliper for the 2000 Ford Excursion and other vehicles presses the pads against the rotor to slow the wheel. This remanufactured disc brake caliper uses a floating design.
- Two steel pistons, each 54 mm in diameter
- Cast iron caliper casting with a rust preventative finish
- Mounting bracket, caliper slides, dust boots and caliper and pad hardware included
- Bleeder screw and crush washers included
- Banjo inlet fitting with a 3/8-24 thread
Quick facts
- Part: TERREPOWER 99-18044A brake caliper
- Also called: disc brake caliper
- Fits: 2000 Ford Excursion and other vehicles
- Position: Front right
- Material: Cast iron caliper casting, steel pistons
- Condition: Remanufactured
A caliper that leaks brake fluid, drags or pulls the vehicle to one side can be worn out. Worn pads, a damaged rotor or a collapsed brake hose can be behind those signs too, so track down the cause before buying. This listing is one caliper for the front right; the front left is a separate part, and both sides are normally replaced together.
Fits
This brake caliper is a direct-fit replacement for the 2000 Ford Excursion, the 1999-2000 Ford F-250 Super Duty and the 1999-2000 Ford F-350 Super Duty. The 2000 Ford Excursion takes one on the front right.
Specifications
Fit and size
- Position: Front right
- Quantity per vehicle: 1
- Piston quantity: 2
- Piston diameter: 54 mm (2.126 in)
- Piston outside diameter: 53.82 mm (2.12 in)
- Inlet thread size: 3/8-24
- Bleeder thread size: M10-1.0
- Housing cast numbers: 5403, 791
Build and materials
- Caliper type: Floating
- Condition: Remanufactured
- Caliper casting material: Cast iron
- Piston material: Steel
- Finish: Rust preventative
- Inlet fitting type: Banjo
- Country of origin: Mexico
In the box
One remanufactured caliper with its mounting bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw and crush washers. Brake pads, anti-squeal shims, wear sensors, a bleeder screw cap and the bracket mounting bolts are not included; plan on new bolts rather than reusing the old ones.
Frequently Asked Questions
Is this one of the 2000 Ford Excursion calipers for the front right side?
Yes. TERREPOWER 99-18044A is a front right brake caliper for the 2000 Ford Excursion. The front left caliper is a separate part.
Is this a 1999-2000 Ford F-250 Super Duty brake caliper for the front right?
Yes. This front right caliper is a direct-fit replacement for the 1999-2000 Ford F-250 Super Duty, and the left side is ordered separately.
Does this remanufactured caliper come with the bracket and slides?
Yes. It includes the mounting bracket, caliper slides, dust boots, bleeder screw and crush washers. Brake pads and the bracket mounting bolts are not included.
What size is the inlet thread on this banjo-style brake caliper?
TERREPOWER 99-18044A has a banjo inlet fitting with a 3/8-24 thread. The bleeder screw thread is M10-1.0.
What does a sticking front right brake caliper look like in daily driving?
The vehicle can pull to one side or drag, and brake fluid can show around the caliper. Have the brakes inspected promptly rather than driving on them.
