TERREPOWER 99P00880B rear left brake caliper for the 2015-2019 Hyundai Sonata and other vehicles is a remanufactured caliper that presses the brake pads against the rotor. Hydraulic pressure moves its piston to do the clamping each time you press the pedal.
- Floating caliper with a single 34 mm (1.34 in) steel piston
- Cast iron casting with an E-coated finish
- Banjo bolt inlet fitting with an M10 - 1.0 thread
Quick facts
- Part: TERREPOWER 99P00880B brake caliper
- Also called: disc brake caliper
- Fits: 2015-2019 Hyundai Sonata and other vehicles
- Position: Rear left
- Material: Cast iron casting, steel piston
- Condition: Remanufactured
A leaking or sticking disc brake caliper can show up as brake fluid around the wheel, a car that pulls to one side under braking, or a rear wheel that drags. These signs alone do not prove the caliper is the problem; a collapsed brake hose can also make a car pull.
Fits
This caliper is a direct-fit replacement for the 2015-2019 Hyundai Sonata and the 2016-2020 Kia Optima, and each of them takes one at the rear left. This listing is one caliper; the rear right is a separate part, and the two rear calipers are normally replaced at the same time.
Specifications
Fit and size
- Position: Rear left
- Quantity per application: 1
- Piston diameter: 34 mm (1.34 in)
- Piston quantity: 1
- Inlet fitting: banjo bolt, M10 - 1.0 thread
- Bleeder screw thread: M10-1.0
Build and materials
- Caliper type: Floating
- Casting material: Cast iron
- Piston material: Steel
- Finish: E-coated
- Condition: Remanufactured
- Housing cast number: 3R 34 MOBIS L
- Country of origin: Mexico
In the box
One remanufactured rear left brake caliper with its mounting bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw with cap and crush washers. Brake pads, anti-squeal shims, wear sensors, bracket mounting bolts and the caliper mounting bolt are not included, so plan on new bolts.
Interchange / FMSI:
FMSI: D1398
Frequently Asked Questions
Is this the right brake caliper for the 2016-2020 Kia Optima?
Yes. TERREPOWER 99P00880B is the rear left caliper for the 2016-2020 Kia Optima; the rear right side is a separate part.
Does this remanufactured caliper come with the mounting bracket?
Yes. The mounting bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw with cap and crush washers are included. Brake pads and bracket bolts are not.
What size is the piston on the TERREPOWER 99P00880B?
The TERREPOWER 99P00880B piston is steel and measures 34 mm (1.34 in) in outside diameter. This floating caliper has a single piston.
How can I tell if a rear brake caliper is sticking?
A car that pulls to one side under braking or a rear wheel that drags can point to a sticking caliper, and fluid at the wheel can mean a leak. A shop can confirm the cause.
What thread does the bleeder screw on this caliper use?
The bleeder screw thread is M10-1.0. The inlet is a banjo bolt fitting with an M10 - 1.0 thread.
