TERREPOWER 99P00927A rear right brake caliper for the 1992-2000 Honda Civic and other vehicles clamps the brake pads against the rotor to slow the vehicle. This remanufactured disc brake caliper replaces a worn or leaking unit at the rear right wheel.
- Floating design with a single steel piston
- Cast iron housing with an E-coated finish
- Banjo bolt inlet fitting with crush washers
- Bleeder screw with a cap
Quick facts
- Part: TERREPOWER 99P00927A brake caliper
- Also called: disc brake caliper
- Fits: 1992-2000 Honda Civic and other vehicles
- Position: Rear right
- Material: Cast iron housing, steel piston
- Condition: Remanufactured
Pulling to one side under braking, a dragging noise from the wheel or brake fluid around the caliper can mean it is worn or sticking, though the brake hose or the pads can also be behind those signs.
Fits
This rear caliper fits the 1992-2000 Honda Civic, the 1994-2001 Acura Integra and the 1993-1997 Honda Civic Del Sol. The 1992-2000 Honda Civic takes one caliper on its rear right side. This listing is one caliper for the rear right; the rear left is a separate part, and both sides are normally replaced together.
Specifications
Fit and size
- Position: Rear right
- Quantity per application: 1
- Piston: one, outside diameter 30 mm (1.18 in)
- Inlet thread size: M10 - 1.0
- Bleeder screw thread: M10-1.25
Build and materials
- Caliper type: Floating
- Casting material: Cast iron
- Piston material: Steel
- Finish: E-coated
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One brake caliper with its mounting bracket, caliper slides, dust boots, and caliper and pad hardware. Brake pads, anti-squeal shims, wear sensors, bracket mounting bolts and mounting bolts are not included, so plan on new bolts; the old ones may not be reusable.
Interchange / FMSI:
FMSI: D374
Frequently Asked Questions
Is this rear caliper for the right side of the 1992-2000 Honda Civic?
Yes. TERREPOWER 99P00927A is a rear right brake caliper for the 1992-2000 Honda Civic; the rear left side takes a separate caliper.
Is this a 1994-2001 Acura Integra brake caliper for the rear right wheel?
Yes. TERREPOWER 99P00927A fits the 1994-2001 Acura Integra at the rear right wheel, and one caliper covers that side.
Does this remanufactured caliper come with its bracket and bleeder screw?
Yes. The caliper comes with the mounting bracket, slides, dust boots, hardware, bleeder screw with cap and crush washers. Pads, anti-squeal shims, wear sensors and mounting bolts are not included.
What thread sizes does this caliper use for the bleeder screw and the inlet?
The bleeder screw thread is M10-1.25, and the banjo bolt inlet thread is M10 - 1.0.
How many pistons does this floating caliper have?
One. The single steel piston measures 30 mm (1.18 in) in outside diameter.
