TERREPOWER G1018 left turbocharger for the 2013-2019 Ford Explorer V6 3.5L and other vehicles forces extra air into the engine. This remanufactured unit is precisely calibrated and meets OEM specs.
- Remanufactured and precisely calibrated for durability and reliability on complex engines
- Journal bearing with a water-cooled center housing
- Fixed geometry turbine with a 0.42 compressor A/R ratio
- Pneumatic wastegate with its actuator
- Compressor inlet outside diameter of 1.81 in (46.00 mm)
Quick facts
- Part: TERREPOWER G1018 turbocharger
- Fits: 2013-2019 Ford Explorer V6 3.5L and other vehicles
- Position: Left
- Material: Housing matched to OE
- Condition: Remanufactured
Loss of power, a whine from the turbocharger or oil smoke from the exhaust can mean a worn turbocharger. If it is the cause, this unit replaces it. First, with the engine off and cool, look for oil in the intake piping and inspect the oil feed line, and leave boost testing to a shop. This listing is one turbocharger for the left side; the right side is ordered separately.
Fits
Listed across a wide range of Ford and Lincoln models, this turbocharger is a direct-fit replacement for the 2013-2019 Ford Explorer V6 3.5L, the 2010-2019 Ford Taurus V6 3.5L and the 2010-2019 Ford Flex V6 3.5L. Owners of other Fords or Lincolns can find their own car in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Left
- Quantity per application: 1
- Compressor inlet outside diameter: 1.81 in (46.00 mm)
- Compressor outlet outside diameter: 1.57 in
Build and materials
- Condition: Remanufactured
- Bearing type: Journal
- Center housing cooling: Water cooled
- Turbine type: Fixed geometry
- Wastegate type: Pneumatic
- Housing material: Matched to OE
- Country of origin: United States
In the box
One turbocharger with a gasket or seal, mounting bracket, mounting hardware and the wastegate actuator. The oil supply line is not included.
Installation notes
- Replace the oil feed line filter per your vehicle manufacturer's instructions.
- Turbocharger exhaust housing support brackets are not required for installation.
Interchange: AA5E-9G438-GC · AA5E-9G438-GE · AA5E-9G438-GJ · AA5Z-6K682-B · AA5Z-6K682-D · AA5Z-6K682-F
This part cross-references / interchanges with the following part numbers:
AA5E-9G438-GC, AA5E-9G438-GE, AA5E-9G438-GJ, AA5Z-6K682-B, AA5Z-6K682-D, AA5Z-6K682-F
Frequently Asked Questions
Is this a Ford Taurus turbocharger for 2010-2019 models with the V6 3.5L?
Yes. TERREPOWER G1018 is listed for the 2010-2019 Ford Taurus V6 3.5L, and it is the left-side turbocharger. Other cars are in the "Vehicles it fits" section.
Does the TERREPOWER G1018 come with the oil supply line?
No. The oil supply line is not included. This turbocharger comes with a gasket or seal, mounting bracket, mounting hardware and the wastegate actuator.
Is the TERREPOWER G1018 turbocharger water cooled?
Yes. TERREPOWER G1018 has a water-cooled center housing with a journal bearing.
Should I replace the oil feed line filter when installing this turbocharger?
Yes. Replace the oil feed line filter per your vehicle manufacturer's instructions. Exhaust housing support brackets are not required for installation.
What size is the compressor inlet on the G1018 turbocharger?
The compressor inlet outside diameter is 1.81 in (46.00 mm), and the compressor outlet outside diameter is 1.57 in.
