PowerStop L2584 front brake caliper for the 2003-2012 Honda Accord and other vehicles clamps the pads against the rotor to slow the wheel. Autospecialty by PowerStop brake calipers suit DIY and professional installers alike.
- Autospecialty by PowerStop line, with a floating caliper design and a single piston
- Bolt-on ready, with no modifications necessary
- 100% pressure tested and inspected
- Assembled with new seals, guide pins, dust boots, a bleeder screw and stainless-steel abutment hardware clips
- High temperature EPDM rubber dust boots and assembly lubricant for smooth caliper operation
Quick facts
- Part: PowerStop L2584 brake caliper
- Also called: disc brake caliper
- Fits: 2003-2012 Honda Accord and other vehicles
- Position: Front left, front right
- Material: Cast iron caliper casting, steel piston
- Condition: New
A worn disc brake caliper can show up as the car pulling to one side, brake fluid around the caliper or pads wearing unevenly. Before you replace it, rule out tire pressure, worn pads and a damaged brake hose, since any of those can also pull the car or wear pads unevenly.
Fits
The vehicles it fits include the 2003-2012 Honda Accord, and the same brake caliper fits the 2004-2014 Acura TSX and the 1999-2008 Acura TL. Each front wheel takes one. Front calipers are normally replaced as a pair, and this listing is a single caliper, so order a second one for the opposite wheel. If your car is not named here, open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: front left, front right
- Quantity per application: 1
- Piston diameter: 57.10 mm
- Bleeder screw quantity: 1
Build and materials
- Caliper type: floating, 1 piston
- Caliper casting material: cast iron
- Piston material: steel
- Integrated parking brake: no
- Condition: new
- Country of origin: China
In the box
One brake caliper. The mounting bracket, mounting bolts, brake pads, pad wear sensor and caliper grease are not included; plan on new mounting bolts, since the old ones may not be reusable.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is PowerStop L2584 the right 2003-2012 Honda Accord caliper?
Yes, PowerStop L2584 fits the 2003-2012 Honda Accord. It is a front caliper for either the left or right side, and each front wheel takes one.
Does the PowerStop L2584 caliper come with pads or a mounting bracket?
No. PowerStop L2584 is the caliper only, with new seals, guide pins, dust boots, a bleeder screw and abutment hardware clips. Pads, bracket and mounting bolts are not included.
What is the piston on this front brake caliper made of, and how big is it?
The single piston is steel and 57.10 mm in diameter. This floating caliper has a cast iron casting.
How can I tell if a front brake caliper is sticking?
Signs can include the car pulling to one side, brake fluid at the caliper or one pad wearing faster than the other. A shop can test a caliper that may be sticking.
Does the L2584 caliper have a built-in parking brake mechanism?
No. PowerStop L2584 has no integrated parking brake. It is a floating caliper with one bleeder screw.
