PowerStop L4810 front right brake caliper for the 1999-2002 Jeep Grand Cherokee clamps the pads against the rotor to slow the vehicle. It replaces a sticking or leaking disc brake caliper, and like other PowerStop brake calipers it is 100% pressure tested and inspected.
- Autospecialty by PowerStop replacement brake caliper, sold individually
- Bolt on ready, no modifications necessary
- New seals, caliper guide pins, bleeder screws and stainless steel brake pad attachment hardware
- High temperature EPDM rubber dust boots
- Assembly lubricant for smooth caliper operation and durability in harsh conditions
Quick facts
- Part: PowerStop L4810 brake caliper
- Also called: disc brake caliper
- Fits: 1999-2002 Jeep Grand Cherokee
- Position: Front right
- Material: Cast iron
- Condition: New
A caliper that sticks or leaks can show up as the vehicle pulling to one side under braking, one pad wearing faster than the other, or fluid around the dust boot. Several other brake problems look much alike, so during a brake service, with the engine off, check the pad wear and the boot for fluid before deciding the caliper is the cause.
Fits
This is a 1999-2002 Jeep Grand Cherokee caliper for the front right wheel, made to go in place of the original stock caliper. This listing is one caliper; the 1999-2002 Jeep Grand Cherokee takes one on this side, the front left is a separate part, and both sides are normally replaced together.
Specifications
Fit and size
- Position: Front right
- Quantity per vehicle: 1 on this side
- Pistons: 2
- Piston diameter: 48.01 mm
- Bleeder screw thread: 3/8 - 24 (0.375 in, 24 threads per inch)
- Inlet thread: 3/8 - 24 (0.375 in, 24 threads per inch)
Build and materials
- Caliper type: Floating
- Caliper casting material: Cast iron
- Piston material: Phenolic
- Dust boots: High temperature EPDM rubber
- Integrated parking brake: No
- Condition: New
- Country of origin: China
In the box
One front right brake caliper with new seals, guide pins, dust boots, a bleeder screw and brake pad attachment hardware. Brake pads, the mounting bracket, mounting bolts and caliper grease are not included; plan on new mounting bolts rather than reusing the old ones.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is the PowerStop L4810 caliper right for the 1999-2002 Jeep Grand Cherokee?
Yes. PowerStop L4810 is the front right brake caliper for the 1999-2002 Jeep Grand Cherokee. The front left side takes its own separate caliper.
Does the PowerStop L4810 caliper come with brake pads and a bracket?
No. PowerStop L4810 comes assembled with new seals, guide pins, dust boots, a bleeder screw and pad attachment hardware. Pads, mounting bracket, mounting bolts and caliper grease are not included.
How many pistons does this floating caliper have?
This front right caliper has two pistons with a piston diameter of 48.01 mm. The pistons are made of phenolic.
What are the signs of a sticking front brake caliper?
Signs can include the vehicle pulling to one side when braking, one pad worn more than the other, or brake fluid around the dust boot. Brakes should be inspected promptly if you notice any of these.
What thread size is the bleeder screw on this brake caliper?
The bleeder screw thread is 3/8 - 24, which is 0.375 in with 24 threads per inch. The inlet thread is also 3/8 - 24.
