PowerStop L4894 rear right brake caliper for the 2006-2008 Dodge Ram 1500 and other vehicles squeezes the brake pads against the rotor to slow the wheel. This disc brake caliper is a floating type with two pistons and bolts on in place of the original stock caliper.
- Autospecialty by PowerStop replacement brake caliper, floating type with two pistons
- Bolt-on ready, no modifications necessary
- Assembled with new seals, guide pins, dust boots and bleeder screws
- High temperature EPDM rubber dust boots
- Assembly lubricant for smooth caliper operation and durability in harsh conditions
- 100% pressure tested and inspected
Quick facts
- Part: PowerStop L4894 brake caliper
- Also called: disc brake caliper
- Fits: 2006-2008 Dodge Ram 1500 and other vehicles
- Position: Rear right
- Material: Cast iron caliper casting, phenolic pistons
- Condition: New
Uneven pad wear, a pull to one side or fluid at the wheel can mean a failing caliper. These signs alone do not prove the caliper is at fault; a worn brake hose can cause some of them. This listing is one caliper for the rear right; the rear left is a separate part, and both are normally replaced together. The rear right takes one.
Fits
It is a direct-fit brake caliper for the 2006-2008 Dodge Ram 1500, and it also fits the 2003-2008 Dodge Ram 2500 and the 2003-2008 Dodge Ram 3500.
Specifications
Fit and size
- Position: Rear right
- Quantity per application: 1
- Piston quantity: 2
- Piston diameter: 44.96 mm
- Bleeder screw quantity: 1
Build and materials
- Caliper type: Floating
- Grade: Standard replacement
- Caliper casting material: Cast iron
- Piston material: Phenolic
- Dust boots: High temperature EPDM rubber
- Integrated parking brake: No
- Condition: New
- Country of origin: China
In the box
One brake caliper with new seals, guide pins, dust boots and a bleeder screw. Pads, mounting bracket, mounting bolts, pad wear sensor and caliper grease are not included.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is this a brake caliper for the 2003-2008 Dodge Ram 2500?
Yes. PowerStop L4894 is a rear right brake caliper for the 2003-2008 Dodge Ram 2500. The rear left side takes its own separate caliper.
Can I use this as a brake caliper for the 2003-2008 Dodge Ram 3500?
Yes. This rear right caliper fits the 2003-2008 Dodge Ram 3500, and the rear right position takes one.
Are PowerStop brake calipers pressure tested?
Yes. PowerStop calipers are 100% pressure tested and inspected, and PowerStop L4894 has high temperature EPDM rubber dust boots.
Does this rear right brake caliper come with the bracket and pads?
No. The mounting bracket, mounting bolts, pads and caliper grease are not included. The caliper comes with new seals, guide pins, dust boots and a bleeder screw.
How many pistons does this floating caliper have, and what are they made of?
This floating caliper has two phenolic pistons with a piston diameter of 44.96 mm. The caliper casting is cast iron.
