PowerStop L4910 front left brake caliper for the 2004-2008 Chevrolet Malibu and other vehicles presses the brake pads against the rotor. It is a floating caliper that replaces the original stock caliper on the front left wheel.
- Autospecialty by PowerStop replacement brake caliper line
- Floating caliper with one steel piston
- New seals, guide pins, dust boots, bleeder screw and stainless steel pad attachment hardware
- High temperature EPDM rubber dust boots
- 100% pressure tested and inspected, with assembly lubricant for smooth caliper operation
Quick facts
- Part: PowerStop L4910 brake caliper
- Also called: disc brake caliper
- Fits: 2004-2008 Chevrolet Malibu and other vehicles
- Position: Front left
- Material: Cast iron (caliper casting)
- Condition: New
Pulling to one side, a dragging brake or fluid leaking near the wheel can mean this caliper is worn, though a collapsed brake hose or worn brake pads can be behind them too, so find the cause first. Plan to change the front right caliper along with this one; this listing is a single caliper for the front left, and the car takes one on each side of the front axle.
Fits
It is a brake caliper for the 2004-2008 Chevrolet Malibu, the 2006-2011 Chevrolet HHR and the 2006-2007 Pontiac G6.
Specifications
Fit and size
- Position: Front left
- Quantity per application: 1
- Caliper type: Floating
- Piston quantity: 1
- Piston diameter: 60.20 mm
- Bleeder screw quantity: 1
- Integrated parking brake: No
Build and materials
- Caliper casting material: Cast iron
- Piston material: Steel
- Dust boots: High temperature EPDM rubber
- Grade: Standard replacement
- Condition: New
- Country of origin: China
In the box
One brake caliper with caliper slides, new seals, guide pins, dust boots, a bleeder screw and stainless steel pad attachment hardware. Brake pads, a mounting bracket, mounting bolts, a pad wear sensor and caliper grease are not included.
Installation notes
- Ready to bolt on; no modifications are needed.
- Mounting bolts are not included, so plan on new ones, since the old bolts may not be reusable.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is PowerStop L4910 a Chevy Malibu brake caliper for the 2004-2008 model years?
Yes. PowerStop L4910 is the front left caliper for the 2004-2008 Chevrolet Malibu. The front right side is a separate part.
Does this disc brake caliper come with brake pads and a bracket?
No. This caliper comes without pads, a mounting bracket, mounting bolts, a pad wear sensor or caliper grease. It includes new seals, guide pins, dust boots, a bleeder screw and stainless steel pad hardware.
Are PowerStop brake calipers sold individually?
Yes. PowerStop L4910 is sold as one front left caliper, and the front right caliper is ordered on its own.
Is the piston in this floating caliper made of steel?
Yes. PowerStop L4910 is a floating caliper with one steel piston, 60.20 mm in diameter, and its caliper casting is cast iron.
Does this front left caliper need any modifications to bolt on?
No. This caliper is bolt-on ready and needs no modifications. The mounting bracket and bolts are not included, so have new bolts on hand.
